c4eva Spoke! (2011-10-23 #c4e)

RAW POST 05:14AM UTC — Show unedited context preceding the line below »
[2011-10-23 05:09AM UTC] #c4e <Tilde88> the pack i bought
[2011-10-23 05:09AM UTC] #c4e <Tilde88> was mkm003
[2011-10-23 05:09AM UTC] #c4e <Tilde88> i tried at 4x OPC
[2011-10-23 05:09AM UTC] #c4e <Tilde88> failed
[2011-10-23 05:09AM UTC] #c4e <Tilde88> i did mkm003 at 2.4x success
[2011-10-23 05:09AM UTC] #c4e <helenclar> Really?
[2011-10-23 05:09AM UTC] #c4e <SOL> I didn't opc my 4x worked fine
[2011-10-23 05:09AM UTC] #c4e <Tilde88> mkm001 at 2.4x OPC fail
[2011-10-23 05:09AM UTC] #c4e <Tilde88> mkm001 at 2.4x no OPC success
[2011-10-23 05:09AM UTC] #c4e <smokey357> @Tilde88 did it install or lupe back to start up screen to bf3
[2011-10-23 05:09AM UTC] #c4e <Tilde88> TDK 4x no OPC succces
[2011-10-23 05:09AM UTC] #c4e <helenclar> So turn off opc and burn at 2.4
[2011-10-23 05:09AM UTC] #c4e <Tilde88> its installing now smokey
[2011-10-23 05:10AM UTC] #c4e <Tilde88> 42%
[2011-10-23 05:10AM UTC] #c4e <helenclar> ?
[2011-10-23 05:10AM UTC] #c4e <Tilde88> this is on the TDK 4x
[2011-10-23 05:10AM UTC] #c4e <zainag> Burning Forza 4 at 4x w/opc on MKM003 now – will let you guys know
[2011-10-23 05:10AM UTC] #c4e <Tilde88> helen
[2011-10-23 05:10AM UTC] #c4e <Tilde88> yes
[2011-10-23 05:10AM UTC] #c4e <helenclar> Great
[2011-10-23 05:10AM UTC] #c4e <Tilde88> but be SURE to not have ANYTHING eating up the system caching
[2011-10-23 05:10AM UTC] #c4e <zainag> lol
[2011-10-23 05:10AM UTC] #c4e <Tilde88> hike up your buffer in IMGburn to like 100
[2011-10-23 05:10AM UTC] #c4e <Tilde88> thuogh i used the stock 40, but i have a fast HDD so
[2011-10-23 05:11AM UTC] #c4e <Tilde88> ill be impressed when the install passes 50%
[2011-10-23 05:11AM UTC] #c4e <zainag> SDD
[2011-10-23 05:11AM UTC] #c4e <helenclar> Tilde88: Me too
[2011-10-23 05:11AM UTC] #c4e <Tilde88> <— IMPRESSED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[2011-10-23 05:11AM UTC] #c4e <zainag> did your verify pass 100%?
[2011-10-23 05:11AM UTC] #c4e <Tilde88> 51%
[2011-10-23 05:11AM UTC] #c4e <Tilde88> verify was 100% no error
[2011-10-23 05:11AM UTC] #c4e <Tilde88> now to burn disc 2 of BF3
[2011-10-23 05:11AM UTC] #c4e <helenclar> This is a good day, haha
[2011-10-23 05:12AM UTC] #c4e <Tilde88> on a TDK at 4x
[2011-10-23 05:12AM UTC] #c4e <zainag> BF3 burnt no prob as well
[2011-10-23 05:12AM UTC] #c4e <helenclar> Tdk? Is that what your installing from?
[2011-10-23 05:12AM UTC] #c4e <zainag> no fucking wonder
[2011-10-23 05:12AM UTC] #c4e <helenclar> You are*
[2011-10-23 05:13AM UTC] #c4e <Tilde88> c4eva is on MSNBC News!. c4eva, what do you have to say for yourself for this amazing wonderful job?
[2011-10-23 05:13AM UTC] #c4e <MoonKnigh> what size should verbatims show up as in imgburn?
[2011-10-23 05:13AM UTC] #c4e <Tilde88> the community is now burning discs with your original customized firmware on cheap brands!
[2011-10-23 05:13AM UTC] #c4e <frenetic> using via chipset on jungleflash w/ windows 7 – portio32.sys is saying not installed
[2011-10-23 05:13AM UTC] #c4e <frenetic> any ideas
[2011-10-23 05:13AM UTC] #c4e <Tilde88> surely, you are an artisan of your craft, c4eva!
[2011-10-23 05:13AM UTC] #c4e <Smithers> MoonKnigh: 8.7GB
[2011-10-23 05:13AM UTC] #c4e <Tilde88> 8,7XX,XXX
[2011-10-23 05:14AM UTC] #c4e <MoonKnigh> hmm, mine are showing up as 8.5 gb
[2011-10-23 05:14AM UTC] #c4e <Tilde88> ( all dual layers hold the same nbo matter the name)
[2011-10-23 05:14AM UTC] #c4e <Tilde88> its the darkness of the disc

[2011-10-23 05:14AM UTC] #c4e <c4eva_> if burning at 4x and it fails on your system, try 2.4x (opc off) on verbatims, works for me everytime
RAW UPDATE 05:17AM UTC — Show unedited context preceding the line below »
[2011-10-23 05:14AM UTC] #c4e <Tilde88> darker = stronger
[2011-10-23 05:14AM UTC] #c4e <Tilde88> c4eva
[2011-10-23 05:14AM UTC] #c4e <Tilde88> i was able to 100% burn and verify on a TDK
[2011-10-23 05:14AM UTC] #c4e <Tilde88> is now @ 75% HDD install
[2011-10-23 05:14AM UTC] #c4e <BotChewer> OK make that 2 times at band camp, memorex has failed me.
[2011-10-23 05:15AM UTC] #c4e <BotChewer> I have to go find my tuba.
[2011-10-23 05:15AM UTC] #c4e <Tilde88> memorex is super bright, compare the disc color to a verb or TDK
[2011-10-23 05:15AM UTC] #c4e <Grimms> no lec uncorrectable error? Good job…
[2011-10-23 05:15AM UTC] #c4e <frenetic> "can't install portio32.sys driver, be sure to run as administrator"
[2011-10-23 05:15AM UTC] #c4e <B3NJAMIN> burned at 2,4 with 003 OPC off 2 times, 2 times vertify failed
[2011-10-23 05:15AM UTC] #c4e <Tilde88> frenetic are you on 64bit
[2011-10-23 05:15AM UTC] #c4e <Grimms> frantic press f8 on startup
[2011-10-23 05:15AM UTC] #c4e <Tilde88> reboot PC and tap F8 a few times after POST
[2011-10-23 05:15AM UTC] #c4e <frenetic> i have to do it in safe mode
[2011-10-23 05:15AM UTC] #c4e <Wearp_> i could burn forza disc1 on 003 at 2.4x but disc2 failed lol
[2011-10-23 05:15AM UTC] #c4e <smokey357> tilde88 where do you chenge buffer in image burn
[2011-10-23 05:15AM UTC] #c4e <Grimms> disable signature enforcement
[2011-10-23 05:15AM UTC] #c4e <Tilde88> and hit Disable Driver Signature enforcement
[2011-10-23 05:15AM UTC] #c4e <Tilde88> smokey357
[2011-10-23 05:16AM UTC] #c4e <frenetic> i did the deso.exe
[2011-10-23 05:16AM UTC] #c4e <Tilde88> its under I/O
[2011-10-23 05:16AM UTC] #c4e <Tilde88> page 2
[2011-10-23 05:16AM UTC] #c4e <Tilde88> deseo doesnt always work well
[2011-10-23 05:16AM UTC] #c4e <Tilde88> F8 it
[2011-10-23 05:16AM UTC] #c4e <frenetic> dseo.exe – however i have to run my system in safemode
[2011-10-23 05:16AM UTC] #c4e <frenetic> i can't boot normally
[2011-10-23 05:16AM UTC] #c4e <Tilde88> no not safe mode
[2011-10-23 05:16AM UTC] #c4e <BotChewer> No place around here stocks TDK DL's. Verbs are crazy expensive at my best buy 30pk for $56
[2011-10-23 05:16AM UTC] #c4e <Tilde88> internet is 50pack TDK for $30
[2011-10-23 05:16AM UTC] #c4e <Tilde88> 4 days arrived
[2011-10-23 05:16AM UTC] #c4e <MoonKnigh> guess I will flash my drive again, still showing up as 8.5 gb in imgburn
[2011-10-23 05:17AM UTC] #c4e <Tilde88> moonknight
[2011-10-23 05:17AM UTC] #c4e <BotChewer> I have some verbs showing up. I just got impatient.
[2011-10-23 05:17AM UTC] #c4e <Tilde88> its fine
[2011-10-23 05:17AM UTC] #c4e <smokey357> if under i/0 it is at 40mb
[2011-10-23 05:17AM UTC] #c4e <Tilde88> yea i used 40MB but i have a super fast HDD
[2011-10-23 05:17AM UTC] #c4e <Tilde88> i recommedn 72
[2011-10-23 05:17AM UTC] #c4e <MoonKnigh> so select overburn?
[2011-10-23 05:17AM UTC] #c4e <Tilde88> it super slow CPU dont over do it
[2011-10-23 05:17AM UTC] #c4e <Tilde88> monnknight

[2011-10-23 05:17AM UTC] #c4e <c4eva_> b3njamin:what burner and are verbatims made in singapore?

This entry was posted in c4eva Speaks!, Xbox 360 and tagged , , , , , , , , , , , , , . Bookmark the permalink.

» Comments RSS Feed

178 Responses to c4eva Spoke! (2011-10-23 #c4e) (Including 31 Discussion Threads)

  1. avatar albert says:

    does anyone know if its safe to to the OCT.11.11 update. please answer i really want to play xbox liv. did c4eva say anything about that?

    Reply | Reply with Quote
  2. avatar lDnice says:

    Hello I was going to buy the new CD/DVD drive for my Laptop ,but don't know if it will fit/work with my Laptop. I have a HP G62 Laptop. Thanks :)

    Reply | Reply with Quote
  3. avatar neCso says:

    Thank You, c4eva ! You're amazing !

    I wanted to ask some very important questions:

    1) Does it matter which Verbatim model I use ? I mean what does MKM003 means ?
    2) What does "LiteOn iHas124-XX B" letter "B" means ? "B" stands for "black" ?

    Thank you.

    Reply | Reply with Quote
    • avatar Anonymous says:

      The "B" uses a different chipset than all the other models. And no, "B" doesnt stand for "Black", I think all the drives are black anyway :)

      Reply | Reply with Quote
    • avatar Darks says:

      Hi neCso

      To answer ur first question, c4eva recommends that u use the verbatim media, he does not say u have to use verbatims. The MKM003 is the model number of the verbatim media, a revision number, just like software versions. As far as I know, the only way to tell if u have the MKM003 or the MKM001 is by inserting one of those blank CDs in to a dvd-rw dl optical drive and starting imgburn. The information panel on the right hand side of the screen in imgburn will tell u the model number of the particular verbatim media u are using. If my explanations is hard to follow, I suggest u google verbatim MKM003 and u will get some visual instructions how to check it ur self.

      To answer ur other question, the B donates the type of chipset the optical drive has. Again more information about chipsets can be obtained my a google search. At present the only chipset that is supported by c4eva's firmware is the B revision.

      I hope my explanations have helped answering ur questions.

      Reply | Reply with Quote
  4. avatar Tyson says:

    well well well where is hitachi? everything is green except for it

    Reply | Reply with Quote
    • avatar PHYSC says:

      damn right WHERE IS HITACHI!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

      Reply | Reply with Quote
      • avatar Canne says:

        HITACHI, HITACHI, HITACHI, HITACHI YAAAAAAAAAAAAAAAAAAAAAAAA HITACHI, HITACHI, HITACHI, HITACHI!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

        Reply | Reply with Quote
        • avatar Serik says:

          I'm with you!!! Where is HITACHI?!! I'm waiting for hitachi v2.0 too!!!!!

          Reply | Reply with Quote
          • avatar PHYSC says:

            I HEAR THAT AMEN TO THAT AND 134 WHERE IS HITACHI'S RATED BY BROWSERS IS SAYING SOMETHING I.E WHERE IS THE FRIGGIN HITACHI FIRMWARE'S WHEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEERE WHERE!!!!!!!!!
            LOL

            BUT SERIOUSLY IT'S NOT FUNNY WHERE ARE THEY?

    • avatar Nickname says:

      C4eva notified quickly if you are working on Hitachi 0500!!!!!!!!!!!!!!!!!!!!!!
      to see if another works on it …

      Reply | Reply with Quote
  5. avatar Gammerman3 says:

    No (IDnice) I think you will need a desktop pc for these particular drives. And yes (Tyson) it is coming. As he himself said it would..

    Reply | Reply with Quote
  6. avatar Hitachi says:

    Hitachi pleaseeeeeeeeeeeeeeeeee………….

    Reply | Reply with Quote
    • avatar PHYSC says:

      Damn right what the f**k is going on it's been forever and a day,it's honestly taking this piss big time and no comments left explaining if he's even looked at it let alone create it yet give us a time line on it at least say if it's this side of christmas or not then we can just jtag instead of hanging around while you build everything bar what hitachi owners require it's damn right skanky and one sided considering the liteon benq and sammy drives have been done for weeks and c4eva you just won't answer that question which has been asked 3000 times that is bloody rude mate speak that is what this site is here for so we can here you speak in text format so do it please.Don't just answer every message bar the hitachi users question's it's obvious they will ask you as your leaving them in the dark about it.

      Reply | Reply with Quote
      • avatar No-Hitatchi-for-you says:

        You are a f**kwad for bitching about a genius FREE product, taking their time for YOU to pirate games and enjoy them, again for free.

        i pray c4eva ditches the Hitatchi drive just because of idiot, ungrateful people like you.

        Reply | Reply with Quote
      • avatar PIE MAN says:

        I agree…can't understand why the Hitachi release is taking soooooo long. I know it's a free service and Hitachi owners aren't bitching & we all love c4eva and appreciate that he is doing this in his own time for free but surely he can advise how long it's going to be before we see this. Are we looking at days, weeks or months?
        PLEASE PLEASE PLEASE PLEASE ADVISE :)

        Reply | Reply with Quote
        • avatar nathan2501 says:

          It is not just the delay which is frustrating, the fact they are so ambiguous about it is making it so much more frustrating. Why wouldn't they just give a statement about the release?

          Reply | Reply with Quote
          • avatar PHYSC says:

            I agree he does a brilliant job as i have 1.91 lt+ it is awesome but it's now obsolete for new games so come on c4eva give us a time scale or shall we abbandon all hope.
            Are you suck with it somehow but don't want to tell us i mean it's better if you do if that's the issue as appossed to keep us waiting longer to be more peed off after were told if that is the case.
            Either way you should no more than
            "IT'S ON THE LIST" come on

  7. avatar kaspik says:

    Burn problem …

    Hello, do you anyone have the same problem? 124-19 b successfully flashed, burned disc, but when verified, there is an error in 50%. Tried with GOW and Batman, 2.4(no OPC) and 4.0 (OPC) on verbatim 003

    Reply | Reply with Quote
  8. avatar fimalexx says:

    cheva certainly fine fellow, but all the same? where sewing on hitachi0500???? well how many it is possible to torment,nu turn the attention, (not uzheli so hardness or replace status that work will never be for this model), it very offensively and sadly, I think not only I write you about it, once again 1000 times thank you to you for your hardness work , but you all the same think!!)

    Reply | Reply with Quote
  9. avatar 9Kay says:

    iDnice, one of these should to which would allow you to connect drive to laptop via USB:
    http://www.amazon.co.uk/gp/aw/d/B001OORMVQ/ref=mp_s_a_23?qid=1319362919&sr=8-23

    Reply | Reply with Quote
  10. avatar Westy75 says:

    I have sammy ms28. flashed it with lt+2.01 and still get dirty disk error. Used jungleflasher 1.89 to flash it with. there were no errors with the read and write. Tested with arkhum city which works in mates benq drive but wont work in my sammy. Any ideas on what i may have done or if its just my laser being s**te. Cheers

    Reply | Reply with Quote
    • avatar doubledd says:

      ive done 100s oif boxes and 10000s of games and found sammys can be tempromental with certain games on certain blank media, try using different disc type if other games play fine in your console, usualy verbatims is they cure kk

      Reply | Reply with Quote
  11. avatar Lorix says:

    Hi Guys…could you tell me how do i can recognize the iHAS models that are "A" "B" or whatever…and could u please post a website where i can buy it at a reasonable price…thank you!! XD

    Reply | Reply with Quote
  12. avatar Segodss says:

    Is there a tutorial for xbox backup creator and LITEON IHAS XXX.

    Thanks

    Reply | Reply with Quote
  13. avatar tofic says:

    Hi, i had an error while flashing my 624 and now it's not recognized anymore. What should i use to restore it to its original FW?

    MTKFlash under DOS? does it work on sata?

    Help me please :)

    Thanks.

    Reply | Reply with Quote
  14. avatar vollachr says:

    Can anyone confirm that the CrossFlash procedure in the following thread from Team-Xecuter forums is good and working?

    http://team-xecuter.com/forums/showthread.php?t=73461

    It's just that it's impossible to find any liteon drives in my country (Israel) and one of the ASUS drives listed there is easy to find.

    Reply | Reply with Quote
  15. avatar favio says:

    Hi, i’ve burn a mkm003 at 2.4x write-speed, with OPC activated. i have a iHAS124-04-b. it didnd show any mistake.the verification was ok. should i be worred? the game was RAGE
    can i play online/live? or i need to write the game again?

    Reply | Reply with Quote
  16. avatar sonyx says:

    Who have a problem with Ixtreme burner max LT with USB sata should be tray witch x360USB pro or connect to normal PC to sata bus. Good lock. :)

    Reply | Reply with Quote
  17. avatar doubledd says:

    heres question for you im using the base model burner with the burner max firmware and latest img burn….verbatims burn 100% and all verify fine so i thought id try an aone gold in the drive with battlefield 3 and it burned 100% and verified am i missing somthing about errors with other discs ? cheers for any reply kk

    Reply | Reply with Quote
    • avatar doubledd says:

      ps disc id i tryed is RICOHJPN-D01-67

      Reply | Reply with Quote
      • avatar QuickMythril says:

        my first two tries using this disc id failed. once it burned but didn't verify, second got a write error. i modified my drive's firmware to allow this disc to be burned at 2.4x and it was successful and verified good. i will continue further testing to see how consistent this is. someone was saying that Optical Quantum discs use the same 'azo' dye as verbatims, so i thought i'd try them. they show the same ID as your aone gold. i will post further finds in the forum if you are interested in my progress. i assume you burned at 4x with OPC on? that's what failed for me.

        Reply | Reply with Quote
  18. avatar doido says:

    how to identify verbatim from India and Singapore manufacturing?

    Reply | Reply with Quote
  19. avatar Namless says:

    Working fine on my Asus 23b3st! I just simply backing everything, than flashed to CFW. Now i got 124B. I burn 2 disc without error (forza4) on 2,4x.
    Thanx C4eva great job, now i waiting for Skyrim!

    Reply | Reply with Quote
  20. avatar Westy75 says:

    been usin mk0001 verbs. same disks work in other consoles. never use any other.

    Reply | Reply with Quote
    • avatar doubledd says:

      do other games play in affected console? is it just these latest games? it does sound like laser going on yours but if plays other games and some one got spare aone gold disc u could try that as said samsungs are nippy i had ones where every now and then individual games had to go on other media even though played all games on one it failed on kk

      Reply | Reply with Quote
  21. avatar Shenmuejon says:

    I to am a laptop only user so i've had to purchase a usb to sata connector for the liteon ihas124b i purchased from amazon. For anyone who wants to get a cheap connector i found one on ebay here: http://www.ebay.co.uk/itm/320383801768?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

    Reply | Reply with Quote
    • avatar phrizz says:

      A lot of newer laptops also have an eSATA port which can be used. If you have an eSATA port, you would just need a SATA -> eSATA cable and a power adapter to power the drive. Although a kit like you posted may be a better solution for simplicity purposes =)

      Reply | Reply with Quote
  22. avatar Anonyma says:

    For those of you who have troubles burning dvds , don't forget to update your burner with the newest official burner firmware before upgrading with the iXtreme Burner MAX

    Reply | Reply with Quote
    • avatar doubledd says:

      Y would you do that? its only gonna get deleted and over written by lt burner max which im sure c4 used latest firmware to build with and tweak

      Reply | Reply with Quote
      • avatar QuickMythril says:

        the way i understood the tutorial, you have to update the firmware, then update the eeprom based on the newest version of the installed firmware, then write Burner Max. if you don't update first, the eeprom might not have consistent data with the newer firmware.

        Reply | Reply with Quote
      • avatar Anonyma says:

        Because as QuickMythril said , the newest official firmware contains datas which are able to install successfully the iXtreme Burner MAX firmware

        Reply | Reply with Quote
        • avatar phrizz says:

          From my understanding, everything you need is what came in the Burner MAX Firmware package. The tutorial doesn't say "go download the latest firmware", it says to use the stuff that came in the pack, with pictures pointing out everything that is included, when to use it and how.

          Reply | Reply with Quote
          • avatar QuickMythril says:

            you're right phrizz. the tutorial says upgrade your drive at the beginning, but the upgrade exe file comes in the folder with the firmware bin file. i was thinking of when i changed the firmware from ihas124b to ihas524b. i had to write the firmware then adjust the eeprom. then i did the tutorial steps afterwards.

          • avatar phrizz says:

            QuickMythril:
            you’re right phrizz.the tutorial says upgrade your drive at the beginning, but the upgrade exe file comes in the folder with the firmware bin file.i was thinking of when i changed the firmware from ihas124b to ihas524b.i had to write the firmware then adjust the eeprom.then i did the tutorial steps afterwards.

            That makes more sense, thanks for clarifying m8 =)

  23. avatar Tyson says:

    It would take a miracle for hitachi to go from In Progress to In Testing

    Reply | Reply with Quote
  24. avatar Bobby says:

    Dude I just wanted to say everything is working like a champ. Bought an iHAS323 B and some verbatim MKM001 discs. Forza 4 burnt and verified 100%. Thank you c4eva and teams for the hard work. You never cease to amaze me :)

    Reply | Reply with Quote
  25. avatar Cranio84 says:

    hi c4eva but the hitachi lt2.0?

    Reply | Reply with Quote
  26. avatar AndreG says:

    I also have burning problems here. I am using the Verbs MKM 003 but every time I try to burn I get en error when verifying around 50%. The errors is the LEC undetectable error. I already wasted 5 Verbatim DVD's and every time I get the same error when verifying and always around 50%.

    I just wander what did C4eva test over this couple of weeks that there are so many people getting the same error as I am getting? I mean if you test something then it must be good when you release it am I correct? And it seems that nobody has a solution for this specific burning error? Maybe ADMIN maybe you can help us?

    Reply | Reply with Quote
  27. avatar Octavio says:

    works in : TSSTcorp CD/DVDW SH-W162D TS01 0227 M ????

    Reply | Reply with Quote
  28. avatar Nickname says:

    notified quickly if you are working on Hitachi 0500!!!!!!!!!!!!!!!!!!!!!!
    to see if another works on it …

    Reply | Reply with Quote
  29. avatar kmos says:

    hi just wondering something, and maybe someone cant ilustrait me, i have the sammy ms25 ok and i flashed it to the new LT 2.01, but in JF sais its LT 2.0, so if i burn one of my backups with the new CFW for PC drives will it work? and if i return it to the regular LT 2.0 will the games work to?

    Reply | Reply with Quote
  30. avatar Gammerman3 says:

    To all hitachi users. "Do not tread loosely my brothers, for we shall have our day and it shall be glorious!" United we stand! I dont intend to start a revolution, Iam just trying to cheer up some downed and frustrated people these days. Hang in there guy, im with ya…..

    Reply | Reply with Quote
    • avatar Sean says:

      yeah my intentions are never to complain about C4eva and his work, everyone knows he does it cuz he wants to and releases it to the masses out of love for the scene. Thats no question much props to him. We would just like some feedback on the issue. If you ask someone a question and they look at you stupidly and say nothing, you're like wtf i just asked a question lol. A reply to questions is all people want and to be able to enjoy the games like everyone else without dropping 63.00 bucks everytime a new game drops. Anyways C4eva if i knew how to do your job I would help out 100% but i dont. So with that being said keep up the good work you are the man bro. People one other thing stop getting your panties in a wad when someone asks a question about hitachi or any other drive s**t, we all just want to enjoy gaming, aren't we all gamers? Just show love and help out if you can the world has enough a**holes already, dont you agree? Hitachi owner, gamer and a laid back dude who enjoys seeing others happy.

      Reply | Reply with Quote
  31. Works with Ricoh or just Hitachi?

    Reply | Reply with Quote
  32. avatar metrx says:

    Does anyone know if you "MUST" solder the trace cut for the Sputnik probe hack. Because I just did my first MXIC, Ive done a good amount of winbonds, so I know how to unlock them and relock them.

    So everything seems to be going well with the mxic i just did these were my steps
    trace cut
    intro, then spi unlock
    then probe with sputnik probe
    read
    intro again
    then write
    then ctrl shift F11 to lock the spi

    However I did not solder the trace cut back and the flashed drive is working with no problems, it ejects fine, and plays the game, and since i locked it with ctrl shift F11 what is the need to solder the trace cut???

    ANYONE??

    Reply | Reply with Quote
    • avatar metrx says:

      I remember having to repair the trace cuts for the mra hacks for the liteons and if you didnt repair those the drive would not turn on or eject but in this case, with the sputnik probe hack it seem to work without a problem, can there be a problem if I do not repair the trace?

      Reply | Reply with Quote
  33. avatar probleemo says:

    Burnt BF disc 1 and failed the verification process twice on verbatims singapore I 09:18:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00). First time set OPC on 4X and the second time 2.4X OPC disabled :/
    The burner used is iHAS124B.

    Reply | Reply with Quote
  34. avatar probleemo says:

    tried BF disc 2 using verbs singapore MKM-003-00 @ 2.4X OPC off and verified 100% :D

    Reply | Reply with Quote
  35. avatar msh1156 says:

    ive tried various makes and speeds opc on and off and only works 100%
    with mk003 verbs burned at 2.4x with opc off on my ihas122b that was crossflashed
    to a ihas524b then upgraded to ixtreme burner max cheers c4eva

    Reply | Reply with Quote
  36. avatar co81a says:

    Hi, I know everybody keeps harking on about the Hitachi's, but you can't blame them, all we want is some clarity as to weather they are likely to be hacked with the 2.0 firmware or not and the only person who can answer that question is C4eva, so come on dude put some of our thoughts and frustrations to rest wether good or bad news it doesn't matter just news is all we are after.

    Reply | Reply with Quote
  37. avatar Thomas Smith says:

    I'm using a Laptop with a external Pioneer dvd burner with the latest Imgburn using sony and memorex dvd dl I have played Gears, Batman, and Rage with no problems.

    Reply | Reply with Quote
  38. avatar Joshua says:

    Hi:

    Will Forza 4 play fine if burned with the iXtreme PC Burner?

    Thanks

    Reply | Reply with Quote
  39. avatar Cicciocampomix says:

    Westy75:
    I have sammy ms28.flashed it with lt+2.01 and still get dirty disk error. Used jungleflasher 1.89 to flash it with. there were no errors with the read and write. Tested with arkhum city which works in mates benq drive but wont work in my sammy. Any ideas on what i may have done or if its just my laser being s**te.Cheers

    I've the same problem!!
    Can someone help us?
    thanks

    Reply | Reply with Quote
  40. avatar jhoandre says:

    que dia sai hitachi 0500 Brasil!!!!!!!!!!!!!!!!!!

    Reply | Reply with Quote
  41. avatar I want 2k12 says:

    ETA on Hitachi 2.0?

    Reply | Reply with Quote
  42. avatar metrx says:

    Does anyone know if you “MUST” solder the trace cut for the Sputnik probe hack. Because I just did my first MXIC, Ive done a good amount of winbonds, so I know how to unlock them and relock them.

    So everything seems to be going well with the mxic i just did these were my steps
    trace cut
    intro, then spi unlock
    then probe with sputnik probe
    read
    intro again
    then write
    then ctrl shift F11 to lock the spi

    However I did not solder the trace cut back and the flashed drive is working with no problems, it ejects fine, and plays the game, and since i locked it with ctrl shift F11 what is the need to solder the trace cut???

    Reply | Reply with Quote
  43. avatar msh1156 says:

    any chance of an updated burner max firmware that would allow you to burn at 2.4x or 1x on all media
    as most like the ricohjpn-d1-067 media i use are forced to burn at 4x and may be ok if i could reduce the speed
    to 2.4x or even 1x?

    Reply | Reply with Quote
  44. avatar egmh says:

    should i use these lite on models?
    i dont have these models what should i do?
    i have a HL-DT-ST DVDRAM GT20N ATA Device for laptop

    Reply | Reply with Quote
  45. avatar DocHolla says:

    i just burned a game 2.4 with opc on and it verify ok will this be ok

    Reply | Reply with Quote
  46. avatar kylebutler says:

    Thanks c4eva..got my drive today worked perfectly

    Reply | Reply with Quote
  47. avatar jhony says:

    PLZ C4EVA… WE WANT LT+ 2.0 FOR FAT HITACHI DRIVES… 32 TO 59… PLZ DONT FORGET US… WE ARE HARDLY WAITING FOR THAT… WE WANT TO PLAY THE NEWER GAMES!!!

    Reply | Reply with Quote
  48. avatar BuriA says:

    Hitachi Please!!!

    Reply | Reply with Quote
  49. avatar sean says:

    Whats up everybody

    Reply | Reply with Quote
  50. avatar Adalberto_1987 says:

    TDK DVD+R DL with OPC off, and 4x, Lite-on 124B no work.

    Reply | Reply with Quote
  51. avatar xxDJBxx says:

    QuickMythril:
    Memorex discs never seem to read in Samsung drives for me.Have experienced this many many times.

    Thats an ongoing issue, no solution yet.

    Reply | Reply with Quote
  52. avatar suprsilentdave says:

    I noticed that sum down loads have 0800 files included (ap2.5 and bin files)are these needed to patch? or do u just burn iso and verify wit imgburn? i.e bf3 had 0800files inc and dae file?

    Reply | Reply with Quote
    • avatar suprsilentdave says:

      Or these files for jtag console or xkey360?????

      Reply | Reply with Quote
      • avatar Brett says:

        I think i got the same rip BF3-XPG it also had those extra files in the folder with the images. I burned them and both discs play fine but i did not go online with them or anything yet. But if those files were missing from the image the game probably wouldnt play. Why they are there baffles me as well but the game does play.

        Reply | Reply with Quote
        • avatar suprsilentdave says:

          yeah thats the one. it looks like it is what is ripped with xbc and it just makes these files on side, hes just uploaded the whole lot possibly? still cant find anything on this/no real answers. Maybe ADMIN cud fill us in?

          Reply | Reply with Quote
  53. avatar Tidsy says:

    Bulkpak opc off 4x speed works fine !!!!

    Reply | Reply with Quote
  54. avatar Tidsy says:

    Liteon 124 B

    Reply | Reply with Quote
  55. avatar Anonymous says:

    GGC H20L burns everything fine so flash required

    Reply | Reply with Quote
  56. avatar Iverson3 says:

    Hi just wanted to see if anyone knows if and when the new abgx will be updated and ready to verifiy new gdx3 games

    Reply | Reply with Quote
  57. avatar xboxgamer says:

    hi
    thank you C4eva for the LT + 2.0 it is the best :-)
    now do you know what will be in the Xbox update on November 2011
    is it can delete the LT + 2.0

    thanks

    Reply | Reply with Quote
  58. avatar kmoz says:

    hi does IHAS124-04-DO works for Burner Max? i saw it in a store and thats all i could see. so im asking beafore i buy it

    Reply | Reply with Quote
  59. avatar Potto says:

    Traxdata dvd dl fail. Tried verbatim MKM003 singapore to 4x with OPC work. Tried verbatim MKM003 Singapore to 2,4X without OPC, work.

    Reply | Reply with Quote
  60. avatar QuickMythril says:

    hey maybe no one mentioned this yet because it won't work… but couldn't the people with hitachis just spoof to another drive to be able to play xgd3 backups? i would use samsung 2.01 for the older hitachis (that way there is no conflict with trying to do ap2.5 checks), and use benq or liteon 2.0 for the newer hitachis (not 0500 they are probably screwed lol). can anyone confirm whether or not this works, as i do not have a hitachi drive? i am just trying to help the people who can't stop bitchin and moanin… ;)

    Reply | Reply with Quote
  61. avatar titty says:

    got my aones gold edition working with liteon smartburn prog writing and verify 100%

    Reply | Reply with Quote
  62. avatar shrubber says:

    i have burned on Fortis DVD+r DL 8x at 4x without OPC th DVD 1 of Forza Motorsport 4… the burning is ok and i have verified all the disc with no error…. should be ok? I don't have any modded xbox here to try it…

    Reply | Reply with Quote
  63. avatar Shenmuejon says:

    Can Hitachi owners replace there drive with a lite-on?

    Reply | Reply with Quote
    • avatar QuickMythril says:

      yes, see my thread in the forum. if you spoof the liteon as a hitachi then it should read xgd3. some say not safe for live, while others say only slims do the realtime firmware checks.

      Reply | Reply with Quote
  64. avatar lmao says:

    http://www.pcpascher55.com if u need anythings,internationnal shipping

    Reply | Reply with Quote
  65. avatar Denis says:

    Works like a charm. Ordered by iHAS124-04 form Newegg (USA) a few days ago. Shipped out of the NJ warehouse. Arrived last night… definitely the B version. Flashing process was easy to follow. Burned my backup of Batman Arkham City at 4x on an MKM003 disc. For those of you having disk compatibility issues, Amazon and Newegg usually carry good MKM003's. I usually order 20 packs from either retailer and never have quality issues.

    Reply | Reply with Quote
  66. avatar sean says:

    Look on craigslist you can find a rrod jtag for under 100 bucks just fix it and roll. Cheaper than buying another xbox broke or new and having to buy disks burners and a slew of other stuff. Just got one for 60 usd gonna rip that bitch open and fix her myself. Cant wait forever for hitachi to drop plus ive got too many bills to be buying all that other stuff. Think about it everyone with hitachi, rrod jtag fixer upper. Play games off hdd and most times before everyone else. No type of mod is 100 safe for online play but if you're into saving money, its an option and you have plenty.

    Reply | Reply with Quote
    • avatar NekoBones says:

      First off jtags are old news, the new glitch hack is now able to boot up dashlaunch with ggBuild. buying a 2nd hand broken xbox will more than likely cost more than the tools needed for the glitch hack and it will be much more of a pain considering it will most likely break again if you even manage to fix it. do yourself a favour and get a jasper xbox 360 and glitch hack it and you will have a xbox that does the same as a jtag and will most likely not break anytime soon or a slim if you prefer slims (i myself have a jasper that runs much cooler and quieter than a slim xbox). or hack your xbox you already have unless its an xenon xbox 360 (very very old) either way buying a broken xbox is just gonna be more hassle than its even worth.

      Reply | Reply with Quote
      • avatar sean says:

        I feel you im pretty good at fixing s**t though lol. I was looking into rgh just gonna cop the tag itll cost me little to nothing. Next console i get is gonna be a ps3 already have 2 boxes, this will be my third. Ones banned the other two are legit. Thanks for your advice.

        Reply | Reply with Quote
    • avatar phrizz says:

      Don't sweat it m8, there's a LOT of people here that just absolutely hate any/everyone that dares to even mention the word "Hitachi", unless "shut the hell up" or "go away" is included somewhere in the comment =P

      Reply | Reply with Quote
  67. avatar infernozorel says:

    My case is very strange, Verbatims MKM-003 (# 43666 – Made in India) are not verifying, the writing goes well but they always fail verifying at 49% (more than 10 coasters now)

    I've modified the disc support speed for the RITEK-S0466 DLs at my iHas 524 firmware, and now the Riteks wright and verifies perfectly !!!!

    How come Verbs are failing and cheap Riteks are verifying !!!!

    Reply | Reply with Quote
  68. avatar Gammerman3 says:

    I suppose by now this has become very frustrating for them as well as us. But I still have faith that it will come however long it may be. Then and only then can we be one happy family again…

    Reply | Reply with Quote
  69. avatar BuriA says:

    wow all seems happy and steady. except for us hitachi users.

    Reply | Reply with Quote
  70. avatar Charly says:

    Come on… c4eva where is the LT+ 2.0 FW for FAT HITACHI? If you need some help we can help you we have 3 different models of hitachi drives to make tests… plz… DONT FORGET US!

    Reply | Reply with Quote
  71. avatar Potto says:

    Need a list about all media dvd dl compatibily with ixtreme burn firmwares. Please…

    Reply | Reply with Quote
    • avatar QuickMythril says:

      there is a forum post all about people trying different discs. read through the forums you will learn a lot. there is also a link to the TX forums about using KProbe2 to verify discs better than imgburn verifies. they are testing different media.

      Reply | Reply with Quote
      • avatar Brett says:

        Ive been reading about the Kprobe checks for checking the integrity of XGD3 burns. Some people are saying you will get banned even if you did everything properly with verbs 01 03 and verifying 100%. Sounds like BS to me. Ive scanned Gears 3 verb max burn with Kprobe and came out slightly over the recommended error level and then Batman right after and it gave better Kprobe results. Same stack of discs both one after the other so dont quite understand the difference unless the rip has something to do with it. Not quite sure how the minor variance in burn will effect you in the long run.

        Reply | Reply with Quote
        • avatar Brett says:

          Also there still have been no reported bans for anything other than the Forza4 truncated disc error and those were bans from TURN10 not xbox and most of them were reversed. So all these checks are well and good but untill the ban hammer falls on a certain game or what not these are good prevenative measures. No one will know for sure untill it happens. C4 has not mentioned team xecuters kprobe checks as being neccessary once on his posts. Just that you follow his guidlines for media and firmware so i dont quite understand alot of scare tactic seem to be coming from. When C4 says not to do something i will listen… in the meantime enjoy the games! Sorry for rambling. And QuickMythril i appreciate all your posts on here as there more informative then most.

          Reply | Reply with Quote
          • avatar QuickMythril says:

            you were posting as i posted my post. something they were saying at the TX forums was that they were encouraging people to use KProbe to find other media that would be acceptable. i guess they didn't have time or money to try every disc at every speed, etc… verbatims are just the best discs, so of course they say use those. again always trying to be on the safest side so people don't blame c4e when something goes wrong.

        • avatar QuickMythril says:

          yeah i am a little wary of people saying this new tool is the best check. i scanned the same disc 5 times, sometimes i was below the suggested numbers, sometimes above. could be programs running while burning, or small vibrations like people walking around. either way i think they put the numbers low to be on the safe side. i have other questions for Ubergeek (also posted in the forums here), but i can't make an account at the TX forums right now (due to high server load) to ask directly.

          Reply | Reply with Quote
          • avatar Brett says:

            I have a spike in kprobe in the middle of my 3 burns done so far. everything else is flat and smooth. Its a PI spike probably at the layer break. Same spot checked on three games. PFI is fine on both and averages overall even with big spike are still under the limit. The PI spike is way above though. SOme people say it may be due to my older ihas124-04-b but i dont know. Any thoughts?

  72. avatar Peekie says:

    Using burner max shall I set LayerBreak in ImgBurn to calculate optimal or user specified???
    If it's user specified what layer shall I set?

    Reply | Reply with Quote
  73. avatar moobs says:

    Kprobed 2 games with media model RICOHJPN D01-067 and they passed without error. I had to alter the brands original burn speed to 2.4 with media code speed edit. The media cost about 20 bucks for 50 discs and worked before on older games. Haven't tried it on xbox tho as it uses a hitachi drive… and am waiting for firmware.

    Reply | Reply with Quote
  74. avatar Fly says:

    It would be great to get LT+ 2.0 for Hitachi this weekend (short days, lond nights camming).

    Reply | Reply with Quote
  75. avatar Demon421 says:

    Hi.
    I have LT 2,01 samsung drive . And i Burn Gears of War 3 about Clone and IMGBurn Verbatim DL
    Game instaling to my Xbox about 100%. When i want Play, game dosen't work. i see error about dirty DVD.
    please help me.

    Reply | Reply with Quote
  76. avatar fab2801 says:

    to moobs: khow do you chage the birn speed to 2.4x of ricohjpn? i'm interest in because i can't with media code speed edit.. it replace mkm strategy with ricoh and delete mkm. please help.. i want burn ricohjph to 2.4x but minimum speed is 4x..

    Reply | Reply with Quote
  77. avatar Brett says:

    What were your PF max and Avg. as well as your PIF max and avg. Because you can still get bad readings that are supposedly unsafe. I have a couple discs that scanned without any errors but the numbers on one section were well over the suggested limit. PF=100 max AVG. no more than 20 PIF=5 max AVG. no more then 4. Discs will scan without errors and still have bad burns. At least thats what im told.

    Reply | Reply with Quote
  78. avatar deadmua5 says:

    when it comes out LT + 2.0 for hitachi??

    Reply | Reply with Quote
  79. avatar Rambuu says:

    At least one answer, that is made with the hitachi fw?

    Reply | Reply with Quote
  80. avatar Sean says:

    " AY-YI-YI- YIIIIIIIII! C4 No Speak iN a long tiiiiiiime!"

    Reply | Reply with Quote
  81. avatar neCso says:

    I burned 3 discs an all of the get I/O error. My model Lite-On iHAS124-19B. Discs from Singapore. Any solution ?

    Reply | Reply with Quote
  82. avatar D09 says:

    We all Hitachi owners are waiting for a response when is LT + 2.0 Released its almost a month now and we have not heard anything about this man.. i know this is free but keep us up to date, if its coming very soon an ETA Date would be nice man keep your info straight not to sound mean but we need this just like sammy/benq/lite-on are already enjoying this new fw man please C4eva my respects to you, keep us up to date with this.

    Reply | Reply with Quote
  83. avatar Jimmy says:

    PHYSC:
    Damn right what the f**k is going on it’s been forever and a day,it’s honestly taking this piss big time and no comments left explaining if he’s even looked at it let alone create it yet give us a time line on it at least say if it’s this side of christmas or not then we can just jtag instead of hanging around while you build everything bar what hitachi owners require it’s damn right skanky and one sided considering the liteon benq and sammy drives have been done for weeks and c4eva you just won’t answer that question which has been asked 3000 times that is bloody rude mate speak that is what this site is here for so we can here you speak in text format so do it please.Don’t just answer every message bar the hitachi users question’s it’s obvious they will ask you as your leaving them in the dark about it.

    You mad bro?
    Stop your bit*hing… I have a hitachi too and im not complaining, its fu*king free,chill.
    If you cant wait any longer and you MUST play now.. go buy yourself a $50 xbox with a different drive and stop crying.

    Reply | Reply with Quote
    • avatar faraz says:

      oh yeah???
      wait??
      until when???
      when xbox 720 coming???
      or until 2034???

      Reply | Reply with Quote
      • avatar ethanol says:

        i feel u bro, but if u really wanna play u could buy a used jasper for ~120 bucks, cause -and i dont mean bad, i really think hitachi 0500 fw is gonna take AT LEAST another half year, seriously. why i think that? because there's too few of those models out there. considering, there's less than half of the number of phat users that are slim users, and then of those slims, around 20% come with hitachi drives.
        i say u either buy a phat used xbox and play everything offline there and keep using from time to time ur slim until hitachi LT+ is released, or just sell your xbox and buy a New slim or phat, just make sure u sell it to some person that doesnt know anything about scene or flashing, like to a girl who wants to play kinect adventures.

        btw, @C4EVA: ARE U PLANNING ON RELEASING A BURNERMAX FW FOR OTHER BRANDS RATHER THAN JUST LITEON IHAS****?

        Reply | Reply with Quote
      • avatar jimmy says:

        If it happens to come out then, then yeah. Not like your paying for it to have it done now. If you cant wait buy another drive, simple

        Reply | Reply with Quote
  84. avatar Bloody says:

    All i see is crying about hitachi when in fact most people own benqs/lite-ons so why not the mass majority first you guys were the same ones laughing up a storm when A.P 2.5 came out and everyone was waiting for firmware while yall guys were gaming it up no problem…. and who gives a s**t if your customers are bugging you about new firmware when in fact you yourself is not paying for it and make 100 percent profit off modding consoles with tools.. THAT THIS GUYS BUILT… if it wasnt for them they would be no you just keep that in mind…. and be grateful he is doing it for the people he been on top of s**t every time it comes out.. A little donation show alot for the appreciation for the work he is not obligated to do…

    Reply | Reply with Quote
  85. avatar c4evasleeps says:

    *yawn*

    Reply | Reply with Quote
  86. avatar Sean says:

    people are gonna be real pissed after tonight when a certain fan favorite hits the scene oh i said too much. Luke I i s yo daddy

    Reply | Reply with Quote
  87. avatar Tyson says:

    He's not making hitachi firmware boys he gave up he can't handle the pressure, I don't blame him for not trying

    Reply | Reply with Quote
  88. avatar Grogos says:

    224B – MKM3- 4x, Batman burned 100%, verified 100%, But when i try to install it, it's crash at 40%. Whats wrong with the imgburn settings?

    Reply | Reply with Quote
  89. avatar Grogos says:

    It's true that MKM-003-00 media it's not well recognized by the FW and it's been renamed to MKM-0a3-00?. Do you update your FW renamed it to solve this issue?

    Reply | Reply with Quote
  90. avatar Grogos says:

    This is an shared excel file with a database of a failed and corrects burnnings with lite ons. Please, spread this file :
    https://docs.google.com/spreadsheet/ccc?key=0AjH5utZ8L9UNdHFadzgxbHZqWFEtOGpfa3BFamdfbnc#gid=0

    Reply | Reply with Quote
  91. avatar D. says:

    Aone RICOHJPN D01 067 ( edited with MSCE to burn at 2.4 )

    ImgBurn:

    OPC Off
    74MB buffer
    burn at 2.4

    EEPROM:

    Smart Burn ON
    Force Hyper Tuning ON
    Online Hyper Tuning ON
    Over Speed Writing OFF

    Works perfectly every time, no failing at 49%.
    100% Burn & Verification.

    Reply | Reply with Quote
View all comments

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong> <img src="" alt="" width="" class="" style=""> <span style="">

DO NOT post comments asking questions like "When will X be released?", or "When will c4eva do X?". All current status information and ETAs, when applicable, are noted in the Status Table on the front page. If it's not listed there, it's not known, so don't ask. All questions of this type will be deleted by the Admins.