Best settings for XGD3 titles?.

HomeForumsGeneral DiscussionBest settings for XGD3 titles?.

This topic has 3 voices, contains 5 replies, and was last updated by avatar d00ziie 1164 days ago.

Viewing 6 posts - 1 through 6 (of 6 total)
Author Posts
Author Posts
2013-08-19 at 07:27PM UTC #8740
avatar
TheBestSeeder

Hi C4Eva,
I just wondered what are the best settings for XGD3 titles?. At the moment I am using a desktop PC with a Lite-on iHAS624B drive with these settings:- Enabled – Force Hyper Tuning, Enabled – Online Hyper Tuning, Enabled – Smart Burn, Disabled – Over speed, I check OPC before write and burn proof unchecked, Buffer size all the way to the end, 1024mb and I never clear OPC Data before or after write. I use these settings and get OK’ish K-probe results but not really perfect, I mostly seem to get these results but not always some time they can be over but not really so terrible that the DL-DVD needs bining:- PI Max about 30 – 70, PI Av. is always 8 or less, PIF Max is always 5, 6, 7 and 8 but should be 4 and under and last PIF Av is always 0.60 and below. I always run with these results because I think they are just slightly out so I don’t worry but I can never get really perfect results which is what I would be happy with getting and I don’t know why or is there something I am doing wrong, I have tried all sorts of ways to burn and those ways seems to be my best method for good results but am I doing something wrong?. I use MKM-003′s Verbs from Total Blank Media. Can anyone shed a little light on my issue.

Thanks,

2013-08-19 at 07:38PM UTC #8745
avatar
TheBestSeeder

I also burn in safe mode every time and use task manager, Imgburn, on High Priority when burning.

2013-08-19 at 10:46PM UTC #8746
avatar
JOSE9TH

http://img201.imageshack.us/img201/2415/77118482.png

2013-08-21 at 04:17PM UTC #8747
avatar
TheBestSeeder

@JOSE9TH. Thank you for the link!. :) I will give that a try with XGD3 settings and see how I get on, will report back. :)

2013-08-22 at 06:42PM UTC #8749
avatar
TheBestSeeder

@JOSE9TH. I tested the new settings but once again I keep getting just over on the PIF Max read of 6 this time, instead which should be 4 or under!, everything else was well under the guidelines. I am not sure really if I should worry about being 2 points over the mark of what it should be 4 or under?. But they do say you should stick to the guidelines on XGD3 titles.

2013-09-30 at 04:13PM UTC #8781
avatar
d00ziie

thanks JOSE9TH that was very helpful ;)

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.