Burner max FW Errors

HomeForumsGeneral DiscussionBurner max FW Errors

Tagged: , , ,

This topic has 3 voices, contains 4 replies, and was last updated by avatar lastgunslinger 2236 days ago.

Viewing 5 posts - 1 through 5 (of 5 total)
Author Posts
Author Posts
2011-10-30 at 05:58PM UTC #3261
avatar
lastgunslinger

ok when i go to write the flash to my dvd burner it says error: failed to write flash
no disk in the drive and all my apps are closed i am following the tut on my laptop while I have my desktop trying to flash new drive I have the iHAS124B drive

thank you for any help

2011-10-31 at 12:35PM UTC #3276
avatar
Mclane

The tutorial perfectly fine, I flashed my 224 as per the tutorial and its 100% ok.

Are you following the tutorial step by step ie making sure the drive is being picked up by the device manager?

How is the drive attached, sata?

2011-10-31 at 06:28PM UTC #3278
avatar
lastgunslinger

The drive is installed properly with the device manager and it is connected thru a sata cable I dont have a usb pro yet its on the list but collage is expensive anyway I also am following the tut step by step on a laptop while trying to flash on the desktop so no other programs are open when I am flashing.

2011-11-02 at 11:59AM UTC #3316
avatar
richy76

make sure your sata is set to ide mode in your bios, if that fails you have incompatable sata.

2011-11-02 at 06:25PM UTC #3331
avatar
lastgunslinger

thank you richy76
but I am a newbie with the bios I have never even had to check that can I get some directions?

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.