Burning backups

HomeForumsGeneral DiscussionBurning backups

This topic has 3 voices, contains 7 replies, and was last updated by avatar andyb2 2090 days ago.

Viewing 8 posts - 1 through 8 (of 8 total)
Author Posts
Author Posts
2011-12-30 at 02:59PM UTC #5375
avatar
steviewilson

I have just got an elite flashed (lite on) with LT 3.0, I had an older Hitachi 79 flashed, will the disks I have already run ok or do they have to be reburned also? As for patching, im in the dark, can someone explain to a newbie (on XGD3) what I have to do? I know I need to get a new burner for 100% burns tho, how do I patch and do I still use Imgburn? Im lost!

2011-12-31 at 01:08PM UTC #5409
avatar
andyb2

All the games listed here need to be redone with proper topology
https://spreadsheets.google.com/pub?key=0AmtrXBZ5bMbGdEZYN1JScjFnMGNncF9JSWs3VmhBNXc

For patching open xbc select image tools select ap2.5sector it will ask where the image is so select it,then it asks for the topology bin file so select it and your done.Burn with imgburn

2011-12-31 at 05:14PM UTC #5410
avatar
steviewilson

So if the games not on the list it can be burned and played without problem?

2011-12-31 at 08:56PM UTC #5411
avatar
QuickMythril

no some games are xgd3 and still not on that list. all ap2.5 enabled titles need patched. there are 6 xgd2 titles with ap2.5, and all xgd3 games include it also.

2012-01-01 at 04:54PM UTC #5432
avatar
andyb2

As Quick said there are a few titles that have not for some reason been put on the list but are AP2.5 enabled.
As for burning yes in theory you burn and play but only if you do it correctly.Online is still an unknown and without abgx to scan your disk kprobe is the only other option and I dont think its all that good as I have disks that are real “bad” by specs but load and play fine.In fact I think I’m going to hook up my benq and run Fable 3 retail disk through kprobe and see how “good” it is

2012-01-01 at 05:17PM UTC #5433
avatar
andyb2

OK kprobe doesnt work with the benq.’out of range’ error.I’ll check later to see if it will work with my old kreon drive

2012-01-01 at 09:59PM UTC #5436
avatar
QuickMythril

kprobe is for liteon drives. for example the ihas

2012-01-02 at 12:38AM UTC #5438
avatar
andyb2

Yea I tried it also.Fable 3 PIF average was 1.59.Thats why I dont believe kprobe when executer is saying .20

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.