Current NAND Reading Techiques

HomeForumsGeneral DiscussionCurrent NAND Reading Techiques

This topic has 3 voices, contains 6 replies, and was last updated by avatar anonimitie 2825 days ago.

Viewing 7 posts - 1 through 7 (of 7 total)
Author Posts
Author Posts
2011-11-28 at 12:24PM UTC #4450
avatar
anonimitie

I’m looking into reading the drive key from my 360s NAND. Most of what I’ve found online so far is at least two years old and seems to indicate that it’s only possible for Jtag-able 360s. Would someone please post a link to the latest NAND Reading Hacks? I’ve seen one that involves hacking in a piece of Cat5 that has a high coefficient of Neat-o and rumors about being able to do it through the USB port.

Also, by reading and hacking the NAND, I’m hoping to get the drive key and *possibly* change the drive type to one of the extras I have lying around. Is that possible and remain Live safe or am I kidding myself?

Thanks!

  • This reply was modified 2825 days ago by avatar anonimitie. Reason: Poor typist!
2011-11-28 at 12:58PM UTC #4452
avatar
twisted247

there is the jtag hack or the reset glitch . the differance is jtag hack can only bedone on dash/ kernel 7xxx or less. and reset glitch can be done on all but xenons and new revison of the slim were they combined the southbridge and hana chip. easyest way for jtag hack order the qsb boards for ur model motherboard “qsb” = “quick solder boards” and order the nandx. then solder the qsb’s to motherboard very easy plug up the nandx to the qsb’s then plug the nandx up to pc via usb cable. and many apps to dump the nand . i use nandpro but for noobs jtagtool would be best. once connected dump ur nand 3 times compare the 3 dumps with jtagtool if identical pick one of the dumps and move it to ur desktop.then write xell to ur 360 nand. boot with the eject button take pic of ur cpu key/dvd key. then download the app 360 flash dump tool. open it go to settings enter ur cpukey then load ur dump of ur nand on the desktop. then click patch tab on bottom left. select the model orig drive then save ur done use jtagtool to write the modified nand back to 360 would be nice to use either a sammy or a hitachi 59 or lower and then no ap25/26 checks. and i have done this many times and no bans as safe as anybody else using cfw. hope this helps u

  • This reply was modified 2825 days ago by avatar twisted247.
  • This reply was modified 2825 days ago by avatar twisted247.
2011-11-28 at 02:37PM UTC #4463
avatar
anonimitie

This thing?

http://www.xconsoles.com/products/Xecuter-NAND%252dX.html

Only breezed over the install instructions so far but, I ignore the Jtag part? Reading and flashing the NAND can be done independent of Jtagging, right?

This looks like a cool project. Thanks for the recommendation.

  • This reply was modified 2825 days ago by avatar anonimitie.
2011-11-28 at 04:55PM UTC #4466
avatar
anonimitie

Okay, after thoroughly reading the install instructions and re-reading Twisted’s post, it looks like all I need to do is install the QSBs? No need to attach the jumper wires since I don’t intend to JTAG anything? By making whatever connections the QSBs make, the USB port will then have access to the NAND?

Please confirm and if I’m right, that’s a cool set-up!

2011-11-28 at 05:41PM UTC #4468
avatar
anonimitie

More research complete. The QSBs have leads that run to the NANDX and then the NANDX connects to the PCs USB port. Got it.

2011-11-28 at 06:58PM UTC #4469
avatar
QuickMythril

you will actually need to fully jtag or rgh the xbox if you want to actually use your nand dump, unless you somehow already have your cpu key. the reason is you have to run xell to get your cpu key, which is unsigned code, so you need the jtag or rgh to be complete. then with the cpu key you decrypt your nand and you will get the dvd key.

2011-11-28 at 07:10PM UTC #4471
avatar
anonimitie

Thanks. Since it’s unlikely my Xbox is Jtaggable, I’m off to learn more about RGH. Expect new thread later.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.