Help CFW update Liteon

HomeForumsGeneral DiscussionHelp CFW update Liteon

This topic has 3 voices, contains 4 replies, and was last updated by avatar twisted247 2254 days ago.

Viewing 5 posts - 1 through 5 (of 5 total)
Author Posts
Author Posts
2011-10-13 at 11:56AM UTC #2075
avatar
ILocDogI

Tried to update from 1.9.1 to 2.0 (Lite-On DG16D2S)
When sending the erase command in Jungleflasher my PC freeze (in the moment i reconnected the power to the 360 dvd drive)
Now my PC won’t start when the lite on drive is connected.
Is there anyway i can start my pc with the 360 drive connected?
Maybe when the drive is in vendor mode with the half tray open method?
Because the only thing i have to do is getting dvd drive in vendor mode so i can flash 2.0
Tried to connect the dvd drive when windows is started and i’m in jungleflasher … but freeze :(

PS: sorry for the bad english :)
PPS: Lite-On is connected with onboard sata, power is comming from an xbox360

  • This reply was modified 2255 days ago by avatar ILocDogI.
2011-10-13 at 12:10PM UTC #2077
avatar
twisted247

r u using onboard sata or 6421card? cause if so u need to follow the tut for setting up 6421 pci card addon
does the drive show up? cause if it froze its prob bricked does drive eject ? if u have ur key try this power on pc then open jf then plug in ur drive select the port that u have the drive on then even if it doesnt show up hit liteon erase then follow directions and power cycle the drive should now see 0×72 and the drive should be in vendor mode write new cfw if it keeps frezzing then use dosflash 16 its dos and not in windows many tuts do some reading google is ur friend ” liteon 7xxx keeps freezing my pc using jf help”

  • This reply was modified 2255 days ago by avatar twisted247.
2011-10-13 at 12:52PM UTC #2085
avatar
QuickMythril

that used to happen to me all the time, when you erase a liteon, windows sometimes hangs. it tries to read the drive but there is nothing there. you have to make a disc to boot into dos and use dosflasher. make sure you have your cfw file that you want to put on there on the disc too and then you have to give it the liteon erase command again from dos, then the write command.

2011-10-13 at 01:31PM UTC #2087
avatar
ILocDogI

Thx for the info about dosflash
Tried this http://www.martin-gardner.co.uk/how-to-recover-your-lite-on-dg-16d2s-drive-after-bad-erase/

Worked for me THX for help.

2011-10-14 at 11:30AM UTC #2153
avatar
twisted247

glad to her u fixed it bro good job

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.