Help clarifying LT3.0 on Hitachi 78/79 install

HomeForumsGeneral DiscussionHelp clarifying LT3.0 on Hitachi 78/79 install

This topic has 3 voices, contains 2 replies, and was last updated by avatar twisted247 1423 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
2012-12-28 at 08:11AM UTC #8315
avatar
novak2k6

The site states to flash 2.0-3.0 using JF ctrl f8. Wouldn’t the actual procedure be flash stock, update dash via usb, then use JF to flash LT 3.0?

And also, when you open JF, do I just press ctrl-f8 at the opening screen at it will auto go into free flash mode? Because it never prompts a message, so if I press Ctrl f8 twice i’m not sure if i just deactivfated the mode.

Thanks.. i plan on doing this Saturday when free from work

2013-01-06 at 06:59AM UTC #8371
avatar
apollo220

it’s always recommended to update to stock firmware first! then update your console either internet or however you do it . Then open jungle flasher and flash the drive . you shouldn’t get a error message upon opening jungle flasher if you have your pc setup properly

2013-01-12 at 02:56PM UTC #8385
avatar
twisted247

system update then flash to stock is mandatory it wont let you proceed till u do use jf to flash to stock then reopen jf press key combo once then proceed good luck!!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.