help !! first update today and osig 9504

HomeForumsGeneral Discussionhelp !! first update today and osig 9504

This topic has 2 voices, contains 3 replies, and was last updated by avatar franzisko75 1702 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
Author Posts
Author Posts
2012-04-05 at 02:06AM UTC #6581
avatar
franzisko75

Hi to all,
for the first time i’ve updated my x360 slim before flash ,and surprise : the osig of the drive is still 9504;
it isn’t changed to 0272.
Now the question:
What i can do ?
the lt 3.0 for 9504 not exist! Can i flash 0272 with the correct key without risk of ban?

Thanks for replies and sorry for my bad english
BR

Francesco

2012-04-05 at 01:54PM UTC #6582
avatar
twisted247

download the lt+ 3.0 pack . inside is a folder called orig firmware select 0272 load it to target. then load ur drives 9504 orig firmware to source. spoof to target then u have a 0272 stock with ur key save it . then load the stock 0272 we just made / saved to source and load lt+3.0 to target spoof then save. now u have lt+3.0 made from stock 0272 with ur key. there u go! flash either ur new 0272 stock or lt+3.0.and ur good.

hope this helps u. remember to lock the spi chip back and to outro device after writing is done before u unhook from or close jf.

  • This reply was modified 1703 days ago by avatar twisted247.
2012-04-05 at 03:00PM UTC #6586
avatar
franzisko75

ok thanks for reply i’ll try and post results here!

BR

Francesco

2012-04-06 at 10:08PM UTC #6611
avatar
franzisko75

successfull procedure thanks again.crossfinger against ban ! ;)

BR

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.