ihas rev a crossflashing to rev b

HomeForumsGeneral Discussionihas rev a crossflashing to rev b

This topic has 2 voices, contains 1 reply, and was last updated by avatar twisted247 1524 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
Author Posts
Author Posts
2012-10-04 at 06:09PM UTC #7817
avatar
nirbeltran

Hi , is it possible to flash ihas 124-04 rev a to lt max ?
can i cross flash it same as i do the asus drives or is it not possible ?
many thx

2012-10-06 at 12:03PM UTC #7825
avatar
twisted247

99.9 % sure its a no go bro on the home page here.

Reveal content Show overview of iXtreme Burner MAX

iHAS124B v1.0 RELEASED
Reveal content Show version details

iHAS224B v1.0 RELEASED
Reveal content Show version details

iHAS324B v1.0 RELEASED
Reveal content Show version details

iHAS424B v1.0 RELEASED
Reveal content Show version details

iHAS524B v1.0 RELEASED
Reveal content Show version details

iHAS624B v1.0 RELEASED
Reveal content Show version details

Click here for a list of additional cross-flashable drive models that support Burner MAX

In addition to the normal Lite-On iHAS “B” burners, the following re-badged OEM drive models are confirmed capable of being cross-flashed with c4eva’s iXtreme Burner MAX firmware. These drives contain the same internal hardware and components as the Lite-On iHAS, but only differ in their branding, faceplate, and/or physical retail packaging. Please note that the drive models marked with a * also have older versions with the “A” chipset, and some now have a newer “C” chipset, so be aware of this when purchasing to ensure that the version you’re getting has the “B” chipset. For information regarding the newer iHAS “C” model, please click here.

Cross-Flashable Models

ASUS
DRW-24B3LT*
DRW-24B3ST*
DRW-24B1LT*
DRW-24B1ST*

Dell
PLDS DH-16ABS

HP
DVD1270i*
DVD1260i*

Lite-On
iHAS122*
iHAS322* (thanks to Hasham, Risay, and Kingston for confirming)
DH-16ABSH11B (thanks to Charles for confirming)

Plextor
PX-L890SA

TEAC
DV-W524GSB

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.