ihas speeds for Aone infinity disc's

HomeForumsGeneral Discussionihas speeds for Aone infinity disc's

This topic has 2 voices, contains 3 replies, and was last updated by avatar twisted247 721 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
Author Posts
Author Posts
2012-11-08 at 08:44PM UTC #8075
avatar
Andy1066

can i force my ihas 124 b to burn disks at a slower speed the admin recently mentioned that aone gold or “360 infinitys” disc’s where pretty good as a sustitute for verbs but my drive will only burn these at 4x any solution
Quote
admin on c4eva Spoke! (2012-11-01 #fw):

Many people, including several team members who swear by them, have much success with WinData discs (sold in the U.S.), or AONE/Infinity360 as they’re branded in Europe.

2012-11-09 at 02:07PM UTC #8082
avatar
twisted247

TO FULLY BURN XGD3 ON A 15-CENT-PRICED DISC (very common RICOHJPN-D01-67 media, any brand is possible)

First of all, we must get a Lite-On iHASx24 DVD burner (or their clones such as ASUS DRW-24B3ST and so on) and flash iXtreme Burner Max firmware.
will upload a tut with pic’s soon
After flash, run ImgBurn 2.5.7.0.

0.As in iXtreme Burner Max official tutorial, turn on Tools -> Settings -> Write -> Perform OPC Before Write, because RICOHJPN-D01-67 media is forced to perform write at least 4x speed.

TWO WAYS to burn xgd3 to any dvd+r dl!!Updated!!

TO FULLY BURN XGD3 ON A 15-CENT-PRICED DISC (very common RICOHJPN-D01-67 media, any brand is possible)

First of all, we must get a Lite-On iHASx24 DVD burner (or their clones such as ASUS DRW-24B3ST and so on) and flash iXtreme Burner Max firmware.

After flash, run ImgBurn 2.5.7.0.

0.As in iXtreme Burner Max official tutorial, turn on Tools -> Settings -> Write -> Perform OPC Before Write, because RICOHJPN-D01-67 media is forced to perform write at least 4xs
1.Select “Write image file to disc” as usual.

2.Click “Advanced Settings” button in bottom right corner. (Marked red in screenshot)

3.Open Lite-On panel in Advanced Settings. It is required to click the individual “Change” button if you changed any setting item and a “Success” message will pop up to confirm the change.

- Turn on Online HyperTuning

- Turn on SmartBurn

- Turn off OverSpeed

- Optionally turn on or off Force HyperTuning according to your disc quality

Now you are ready to go! Enjoy XGD3 backups dear friends

Note that in our tests, some discs won’t work at all even with all settings done!! Please try and buy another brand of disc if you encounter this.

!!Way Two!!

This will fix it!!!! patch your games with this link all individual topology patches!!

then flash your ihas with this edited c4evas fw iHAS-124B-AL0S-MKM001MKM003-final_AONE+RITEK+MKM003x2speed.bin then restart your pc or laptop, this is for ihas 124b.

Then

Open IMGBurn and go to TOOLS>SETTINGS>WRITE. Clear the box that Performs OPC Before Write. Then go to TOOLS>SETTINGS>I/O and click Page 2 tab. Move buffer size between 71-73mb, Main Buffer Threshold to 25%, and Device to 50%. Press Ok
Prepare to burn (Write Image File To Disc). On this page you can change the setting to burn at 2.4x and advanced settings (settings area bottom-right of the three icons in that area). Go to Lite-On tab…In the Change For: dropdown-list you will disable Forced HyperTuning, Online HyperTuning, and OverSpeed. If not enabled, Enable SmartBurn. Press OK.
Burn your XGD3 and verify. It should verify at 100%.

all the edited fw does is lets aone and ritek disks burn at 2.4 speed, this will not **** your drive up. all dvd burners can burn at 2.4 speed, its just as good as c4s fw!

this will work for everyone,

  • This reply was modified 722 days ago by avatar twisted247.
2012-11-09 at 11:34PM UTC #8094
avatar
Andy1066

Thanks for this used the edited FW seems to be working a treat

2012-11-10 at 12:36AM UTC #8095
avatar
twisted247

no prob good luck!!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.