ihas124b burning problems

HomeForumsGeneral Discussionihas124b burning problems

This topic has 2 voices, contains 4 replies, and was last updated by avatar Simleo24 1628 days ago.

Viewing 5 posts - 1 through 5 (of 5 total)
Author Posts
Author Posts
2012-06-17 at 01:56PM UTC #7339
avatar
Simleo24

Two weeks ago i bought an ihas124b whit the c4eva firmware already installed. I installed it on the computer and tried to burn some discs and it worked very fine. But today i tried to burn another disc and something went wrong. The disc burn succesfully to 100% (mkm 003 4x opc) but when i put it in the xbox the game image on the dashboard doesn’t appear and if I start it the screen goes black and then says disc error, disc not readable. I tried other 2 discs whit a lower writing speed (2.4x whit opc and 2,4x whitout opc) but imgburn says “power calibration error:area full” at the end. So I reinstalled imgburn and tried to burn another game (4x opc enabled, mkm 003) but when I put it in the xbox it says disc not readable. Someone know what is happening? Sorry if i used bad english.

2012-06-17 at 07:58PM UTC #7343
avatar
flashomega

i recently had this problem as silly as this sounds the problem falls with imgburn un-install it and re install imgburn v2.5.5.0 the problem seems to be with imgburn v2.5.7.0
i bet you get no errors

2012-06-18 at 08:19AM UTC #7346
avatar
Simleo24

I tried now, 2 times whit different settings, but it does the same error. And now I wasted 10 verbs :( .
Should I try to reinstall the c4va driver or change the ihas physical position?

  • This reply was modified 1629 days ago by avatar Simleo24.
2012-06-18 at 03:05PM UTC #7352
avatar
Simleo24

I resolved the problem. I changed the position of the ihas and now he works perfectly. I don’t know why but it’s ok :mrgreen:

2012-06-19 at 08:34PM UTC #7357
avatar
Simleo24

Again I was wrong :cry: . I tried to burn another disc, 100% verified but when i put it on the xbox it says unreadable disc. So i tried to put the other disc that i burned yesterday, a working disc, but it says unreadable disc :cry: . I don’t understand anything :-? :?:

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.