IXtreme Burner MAX (verify fail 49%)

HomeForumsGeneral DiscussionIXtreme Burner MAX (verify fail 49%)

This topic has 5 voices, contains 16 replies, and was last updated by avatar halftone 2247 days ago.

Viewing 10 posts - 1 through 10 (of 17 total)
Author Posts
Author Posts
2011-10-23 at 08:30PM UTC #2741
avatar
emmanuel78

alright well im using the IHAS124B and im using windata discs and in img burn the burn is 100percent and when it starts to verify it gives me an I/O error at 49 percent is there any solution to this??? please!

2011-10-23 at 08:33PM UTC #2742
avatar
QuickMythril

what is the media id of the discs you are using and what speed did you burn?

2011-10-23 at 08:38PM UTC #2743
avatar
emmanuel78

i burnt the disc at 4.0 (i selected 2.4 but it changed it to 4.0)

the disc id = RICOHJPN-D01-67

2011-10-23 at 08:49PM UTC #2744
avatar
QuickMythril

http://c4evaspeaks.com/topic/list-of-confirmed-discs-that-burn-and-verify-with-max-firmware/

read this post and try what i did. let me know if it works for you.

2011-10-23 at 08:54PM UTC #2745
avatar
emmanuel78

ok, im gonna try that do you have AIM?

2011-10-23 at 09:05PM UTC #2746
avatar
QuickMythril

no but it should be easy. just run media code speed edit, and load the version of ixtreme burner max you put onto your drive. double click RICOHJPN-D01-67 and then choose the other RICOH and save it. then flash the new firmware that says speedpatched and reboot.

2011-10-23 at 09:06PM UTC #2747
avatar
emmanuel78

ok, i am doin that now thanks!

2011-10-23 at 10:30PM UTC #2752
avatar
tonymarco134

i am confused on what is going on why are people flashing there new lite on b and then flashing them back to stock and then reflashing them again. Is it for people that don’t have verbatims because i have verbatims. I am so confused on what is going on, Is this for people that there disk won’t verify all the way so they flash back to stock and then somehow make there dvd drive burn 2.4x and then reflash, Im just curious because im still waiting for my drive to get here and when i get it i want to be ready to go

2011-10-24 at 12:12AM UTC #2757
avatar
QuickMythril

yeah basically this is just something i was experimenting with since my discs were having errors at 4x, i decided they might work better at 2.4x. the firmware won’t allow the discs to burn that slow, so i changed the firmware to think that those types of discs are 2.4x. after burning a disc, i was putting the “original” ixtreme burner max firmware before i modded it, that allowed 4, 6, or 8x speeds. that way i could try to verify it at a fast rate, since that is the speed the xbox would try to read it at as well. plus i didn’t want to wait for slow verifying times. so far i burned ten discs with no errors and all passed the verify, except one i forgot to verify before i deleted the iso from my computer. also since there is no disc that supports both 2.4 and 8 at the same time, i put it back to the higher speed when i do xgd2 games, since it’s not going so far out to the edge of the disc.

2011-10-24 at 12:59AM UTC #2762
avatar
emmanuel78

it worked!! aha! i love you so much!!! you really are the best ! thank you so much!! it worked!!!!

Viewing 10 posts - 1 through 10 (of 17 total)

You must be logged in to reply to this topic.