kingdom of amular unreadable disc error and wont install

HomeForumsGeneral Discussionkingdom of amular unreadable disc error and wont install

This topic has 4 voices, contains 8 replies, and was last updated by avatar Motocross809 1755 days ago.

Viewing 9 posts - 1 through 9 (of 9 total)
Author Posts
Author Posts
2012-02-15 at 06:59AM UTC #6090
avatar
Bloody

so i must of burned this game a trillion times and in always fails to install or even load up the beginning of the game it just says game error.. i do have ihas 124b i ran it threw abgx burned it at 2.4x opc off HT OT and smartburn enbabled and all of them failed … anyone else have this issue?

2012-02-15 at 09:29AM UTC #6097
avatar
cosmoo

Have you put your backup though AGBX once burned to make sure there’s no errors on the backup?

Also what media are you using?

2012-02-15 at 02:19PM UTC #6106
avatar
Bloody

No errors when i run the disc threw abgx and im using verbs mmk001 still problems

2012-02-15 at 03:21PM UTC #6108
avatar
cosmoo

I take it this is the only backup you have had this problem with?

2012-02-15 at 04:17PM UTC #6109
avatar
Bloody

yup my lite-on is practically brand new and i never had an issue before this and ive seen a few people say they had this error they verify and everything .. but i cant install it or when i start to play the first time it loads it comes up game error.. all 7 or 8 times i burned it.. no other game does this with me

2012-02-15 at 04:29PM UTC #6110
avatar
cosmoo

It’s a bit of a strange problem.. maybe worth re-ripping the game but I’m probably just clutching at straws.

I’m sorry I cant really help you with this one but please let me know if you ever figure out the problem.

2012-02-16 at 04:56PM UTC #6122
avatar
mtsdesigner

I have the same problem, I burned 5 discs, and always get the “clean the disc” error in 43% of the installation, and when I click in New Game in the main menu of the game.

Burned with iHas 524 and iXtreme Max: 2,4x, SmartBurn, midia id: CMC MAG-D03-64, only the avg. PI was a lit bit +100.

2012-02-17 at 08:39AM UTC #6132
avatar
Bloody

yeah i dont understand even when i re rip the game same problem i just dont understand what im doing wrong

2012-02-17 at 12:19PM UTC #6136
avatar
Motocross809

Try turning off OHT, OHT made my disc fail at 43% and when it went through K-Probe I had a 1000pi and 130pif spike at the layer break (43%) but with your setting OP without OHT you should get a decent burn. Try it out and run it through KProbe

*edit* It might not get in the recommended range with K-Probe, but idk if that is really necessary if it installs on the HDD fine and it is a 100% burn

*Edit* To clarify, my settings on image burn for MK-003 are
———————-
Buffer-512MB
OPC-Off
BURN PROOF- Off
4x Burn Speed
———————-
HT-On
SB-On
OHT-Off
OS-Off

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.