Liteon 0800 and xbc 2.9.0.350

HomeForumsGeneral DiscussionLiteon 0800 and xbc 2.9.0.350

This topic has 2 voices, contains 2 replies, and was last updated by avatar chitownlatino 1783 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
2012-01-20 at 02:58AM UTC #5805
avatar
chitownlatino

What are the proper setting on xbc. If I leave the process ap25 box checked, it takes about 2 1/2 hours to rip. Box unchecked it takes about 25 mins. I ran both thru abgx and burned with ihas on verbs and both played fine. Is that cause I have a Hitaschi 59 drive or does it not really matter at all.
Any help would be great. Thanks

2012-01-20 at 06:18AM UTC #5807
avatar
QuickMythril

if you check the box it takes longer because it has to create topology data from scanning the entire disc. it’d be easier and better to just leave this unchecked and run thru abgx360 and get the topology files created by the team. of course having a hitachi 59 means that you can play discs that have blank ap2.5 sectors or sectors with data that doesn’t match the current drive firmware or dashboard version. all that will be ignored since that drive cannot do those type of checks. you might as well burn them with the topology data included in case you ever need to use that disc in a different xbox.

2012-01-21 at 01:32AM UTC #5825
avatar
chitownlatino

Exactly what I neeeded to know. Thanks for the help quickmythril

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.