LT + 3.0 Problems for Liteon DG-16D2S 74850C

HomeForumsGeneral DiscussionLT + 3.0 Problems for Liteon DG-16D2S 74850C

This topic has 1 voice, contains 0 replies, and was last updated by avatar DBCar83 1448 days ago.

Viewing 1 post
Author Posts
Author Posts
2012-12-20 at 04:28AM UTC #8256
avatar
DBCar83

Okay guys maybe you can help. I have a 74850C drive I am trying to flash for a friend here’s a catch although I am not sure significant this one is A0A2 and not A0A1. I read from various outlets it doesn’t matter. Anyways, I have the original dummy bin file before his drive died and now on this new drive it reads dvds and really old original 360 games but it goes back to dash when ran with a (ihasB) burnt and verified games. Although the newer original games it goes and sits a white Xbox logo screen. I never encountered these problems before after all these years of flashing and yes the ribbons were not attached when flashed and reattached properly when tested. I used the newest jungle-flasher and the iprep dos method as well, but to no avail. It has been updated to the newest dash and here is the following data to be used for your evaluations:

JungleFlasher 0.1.92 Beta (304)
Session Started Wed Dec 19 21:24:53 2012

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 5 windows drives A: C: D: E: G:
Found 2 CD/DVD drives D: E:

Loading firmware file C:UsersWRCupZDesktopVideo Game StuffConnerDummyConner.bin
MD5 hash: faa434cf983d726731adf009f237bc6b
Inquiry string found
Identify string found
Drive key @ Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Loading firmware file C:UsersWRCupZDesktopVideo Game StuffJungleFlasher v0.1.92 Beta (304)firmwareFirmwareLTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT – ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied

Target f/w saved as: Lite_CFW.bin
Drive is Lite-On..

Key found in KeyDB at record
Key is:
Key has been tested and verified, thanks C4eva !

Sending Lite-On-Erase request to port 0xA000
…………..
Drive returned Status 0xD0

Serial flash found with Status 0×72
Manufacturer ID: 0xEF
Device ID: 0×11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0xA000
SPi flash found with Status 0×72

Sending Chip Erase to Port 0xA000
Erasing:
Writing target buffer to flash
Writing Bank 0: …………….
Writing Bank 1: …………….
Writing Bank 2: …………….
Writing Bank 3: …………….

Flash Verification Test !
Reading Bank 0: …………….
Reading Bank 1: …………….
Reading Bank 2: …………….
Reading Bank 3: …………….
Write verified OK !

Sending Vendor Outro to port 0xA000
Drive is Lite-On..

Key found in KeyDB at record
Key is:
Key has been tested and verified, thanks C4eva !

Thanks for yal help,

-DBCar83-

Viewing 1 post

You must be logged in to reply to this topic.