Need Help!

HomeForumsGeneral DiscussionNeed Help!

This topic has 2 voices, contains 2 replies, and was last updated by avatar serj 2390 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
2013-02-28 at 08:53AM UTC #8563

I have a dvd burner LG HL-DT-ST DVDRAM GH24NS90 and is combapible whit BurnerMAX_v0.15 but when i try to rw a game on disc at verify i get an error..The error is thisI
13:01:20 Destination Device: [3:0:0] HL-DT-ST DVDRAM GH24NS90 IN01 (F (ATA)
I 13:01:20 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 13:01:20 Destination Media Supported Write Speeds: 4x; 8x
I 13:01:20 Destination Media Sectors: 4.267.040
I 13:01:20 Write Mode: DVD
I 13:01:20 Write Type: DAO
I 13:01:20 Write Speed: 4x
I 13:01:20 DVD+R DL Reserve Track: No
I 13:01:20 Link Size: Auto
I 13:01:20 Lock Volume: Yes
I 13:01:20 Test Mode: No
I 13:01:20 OPC: Yes
I 13:01:20 BURN-Proof: Enabled
I 13:01:20 Write Speed Successfully Set! – Effective: 5.540 KB/s (4x)
I 13:01:20 Book Type Setting: DVD-ROM
I 13:01:57 Optimal L0 Data Zone Capacity: 2.133.520
I 13:01:57 Optimal L0 Data Zone Method: Copied From Original Disc
I 13:01:57 Set L0 Data Zone Capacity Succeeded!
I 13:01:57 Filling Buffer… (80 MB)
I 13:01:59 Writing LeadIn…
I 13:02:04 Writing Session 1 of 1… (1 Track, LBA: 0 – 4267014)
I 13:02:04 Writing Track 1 of 1… (MODE1/2048, LBA: 0 – 4267014)
I 13:02:04 Writing Layer 0… (LBA: 0 – 2133519)
I 13:15:19 Writing Layer 1… (LBA: 2133520 – 4267014)
I 13:28:49 Synchronising Cache…
I 13:28:54 Closing Track…
I 13:28:57 Finalising Disc…
I 13:29:32 Exporting Graph Data…
I 13:29:32 Graph Data File: C:Usersburca_000AppDataRoamingImgBurnGraph Data FilesHL-DT-ST_DVDRAM_GH24NS90_IN01_MERCOLEDÌ-6-FEBBRAIO-2013_13-01_MKM-003-00_4x.ibg
I 13:29:32 Export Successfully Completed!
I 13:29:32 Operation Successfully Completed! – Duration: 00:28:11
I 13:29:32 Average Write Rate: 5.317 KB/s (3.8x) – Maximum Write Rate: 5.603 KB/s (4.0x)
I 13:29:32 Cycling Tray before Verify…
W 13:29:39 Waiting for device to become ready…
I 13:29:48 Device Ready!
I 13:29:56 Operation Started!
I 13:29:56 Source Device: [3:0:0] HL-DT-ST DVDRAM GH24NS90 IN01 (F (ATA)
I 13:29:56 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 13:29:56 Source Media Supported Write Speeds: 4x; 8x
I 13:29:56 Image File: D:jocuri xboxDead.Space.3.RF.XBOX360-P2PDVD1ds3disc1.dvd
I 13:29:56 Image File Sectors: 4.267.015 (MODE1/204
I 13:29:56 Image File Size: 8.738.846.720 bytes
I 13:29:56 Image File Volume Identifier: DVD_ROM
I 13:29:56 Image File Volume Set Identifier: 74f9c000MS UDFBridge
I 13:29:56 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 13:29:56 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 13:29:56 Image File File System(s): ISO9660; UDF (1.50)
I 13:29:56 Read Speed (Data/Audio): MAX / MAX
I 13:29:57 Verifying Session 1 of 1… (1 Track, LBA: 0 – 4267014)
I 13:29:57 Verifying Track 1 of 1… (MODE1/2048, LBA: 0 – 4267014)
I 13:29:57 Verifying Layer 0… (LBA: 0 – 2133519)
W 13:36:00 Failed to Read Sectors 2112480 – 2112511 – Reason: Unrecovered Read Error
W 13:36:08 Failed to Read Sector 2112496 – Reason: Unrecovered Read Error
W 13:36:21 Retrying (1)…
W 13:36:29 Retry Failed – Reason: Unrecovered Read Error
Can somoane help me???Soryy for mai bad eng!

2013-03-04 at 10:13PM UTC #8573

I bought an I-has way back when Burner Max launched so I haven’t really been following the follow up cross flash and bm payload tool info. However, I have the same drive as you as my second and haven’t found any info stating its supported. In fact I have found that it is NOT supported. I may be wrong and if I am I’ll apologize in advance. Again I have an Ihas so I haven’t put much effort into searching for the info on my LG drive as I don’t need it.

As far as your error is concerned with my Ihas I have never had luck with burning at 4x even while using Verbs. I have used Windata, Memorex verbs etc all with minimal issues but only when burning at 2.4x. Anytime I use 4x the burn itself fails or the verify fails. If you can in fact write BM to that drive I would recommend downloading media speed edit to spoof your disc ID so it will allow that media to record at 2.4 since according to your log 2.4 isn’t supported. Other then that many other factors can contribute to a bad burn. If you are running a lot of tasks CPU or Hard drive Bottleneck can cause write issues. If you have a lower-mid end pc make sure you aren’t running any other tasks while you write to disks. One quick fix is if you have more then one hard drive put your rom file on your non-boot drive and burn from that location. Before xgd3 I was able to burn 3 at a time with no issue using 3 media drives and 3 files on separate hard drives and I have a 6 core cpu with 8gb ram.

Also some have never had an issue with 4x so maybe try to burn again making sure no other tasks are running. Sometimes it’s nothing more then a shitty disc.Doesn’t usually happen with verbs but, no brand has a 100% success rate.

2013-03-05 at 12:43PM UTC #8576

The media speed edit tool not suporting mi Lg GH24NS90:(….

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.