Plextor PX-L890SA 1.5mb ?

HomeForumsGeneral DiscussionPlextor PX-L890SA 1.5mb ?

Tagged: ,

This topic has 3 voices, contains 2 replies, and was last updated by avatar twisted247 2502 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
2012-11-19 at 11:59AM UTC #8158

I was looking for a Plextor PX-L890SA and apparently it has only 1.5mb buffer instead of 2mb, is it eligible for crossflashing?

2012-11-20 at 12:23AM UTC #8162

That is not true – I have one and it is 2 mb. Refer to THIS thread.

2012-12-07 at 02:21AM UTC #8210

Not sure if its common knowledge on these forums but it would seem DL over-burning is possible out the box.…/dp/B0086ZU8XK

Lightning UK has also done some tests on it, looks ok.

Only problem is it seems difficult to get a hold of in the UK. Maybe more readily available in the US. Wonder if its possible to flash a bog standard 5280s with the plus FW?

Based on the results from the Verb DL discs, this seems to be a completely acceptable drive with a decent burn quality. but the thing that stuck out to me the most was that DVDInfoPro and KProbe see this as an “ATAPI iHAS624 B

according to logs it appears to operate consistently in and around the layer break using the full 8.7Gb capacity at least with Verbs anyway, it’s all over the place with cheap media at high speeds though as expected

Its a perfect alternative for those who cannot get hold of a now discontinued B drive (as you know)

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.