residnt evil 6 verify 50% failed

HomeForumsGeneral Discussionresidnt evil 6 verify 50% failed

This topic has 2 voices, contains 7 replies, and was last updated by avatar esem1982 1507 days ago.

Viewing 8 posts - 1 through 8 (of 8 total)
Author Posts
Author Posts
2012-10-21 at 02:17PM UTC #7923
avatar
esem1982

hi guys im having truble burning xgd3 and in 20 disc i have just 3 burned perfectly

each time it stop at 50% in verify
heres the last setting and im using FTI R08 065 disc
smart burn : yes

force : yes

online : yes

over speed : no

write speed media disc speed 2.4x
write speed 2.4x
clear history
opc : yes
burn proof : enable
I/0 buffer : 80mb
layer break : 2133520

2012-10-21 at 02:34PM UTC #7924
avatar
twisted247

that’s what happens when you buy cheap media/disc. use verbatims

OPC-ON
BurnProof – Enabled
Forced Hyper Tuning – ON
Online Hyper Tuning – ON
Smart Burn – ON
OverSpeed – Disabled
Buffer – 80mb
Burn Speed – 4x /2.4x

also if it’s a newer pc check that ur bio’s sata ports r set to ide or legacy ide instead of ahci. ur bio’s might not have these settings if not then nothing you can do . plus close all programs/app’s running prior to trying to burn allow it to burn without using the pc 4 anything else while its burning and verifying . good luck.

p.s there is a burner max fw premodded to give support for cheap media for people who don’t understand that verbatims r the best to use less problems and no coasters 100% works everytime. I think its ur media not any settings. but check the bio’s just incase.

2012-10-21 at 02:36PM UTC #7925
avatar
esem1982

wats this bio ?

2012-10-21 at 03:46PM UTC #7926
avatar
twisted247

when you boot ur computer it will show a splash screen such as – dell , hp , gigabyte ,asus and so on. at that point your looking for something like f1 to boot menu f11 for setup . your looking for what key takes you to your bio’s setup the splash sceen doesn’t give you a lot of time so watch as it boots along the bottom of the screen or top right corner. can’t believe you don’t know what pc bio’s are and your trying your hand at hacking / modding tx products at there best huh? sorry bro but if you don’t know what bio’s are then I can’t help you anymore then I already have good luck with it spend the extra on verbatims and this shouldn’t be a problem. cause did you save any $$ when you buy 20 disc cheap but only 3 burned complete or playable neway. you could have had paid a little more and verbatims about 1.00 per disc U.S AND THATS CHEAP!!
and then you would have 20 new games instead of 3. you see what im saying ? VERBATIMS IS THE ONLY WAY TO GET IT RIGHT 100% OF THE TIME.

2012-10-21 at 04:49PM UTC #7927
avatar
esem1982

i m starting to remember maybe i do but we call it something else here any way believe me if i could i would buy this f….kin verbatim and its very high price here and cant find it easy bro

any how look at this shit here

I 15:50:52 ImgBurn Version 2.5.7.0 started!
I 15:50:52 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 15:50:52 Total Physical Memory: 3,406,904 KB – Available: 2,674,060 KB
I 15:50:52 Initialising SPTI…
I 15:50:52 Searching for SCSI / ATAPI devices…
I 15:50:53 -> Drive 1 – Info: ATAPI iHAS524 B AL2A (D:) (ATA)
I 15:50:53 Found 1 DVD±RW/RAM!
I 15:56:21 Operation Started!
I 15:56:21 Source File: C:residnt evil 6Resident Evil 6 XBOX360 – DVD1.dvd
I 15:56:21 Source File Sectors: 4,267,015 (MODE1/2048)
I 15:56:21 Source File Size: 8,738,846,720 bytes
I 15:56:21 Source File Volume Identifier: DVD_ROM
I 15:56:21 Source File Volume Set Identifier: eccbc000MS UDFBridge
I 15:56:21 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 15:56:21 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 15:56:21 Source File File System(s): ISO9660; UDF (1.50)
I 15:56:21 Destination Device: [2:0:0] ATAPI iHAS524 B AL2A (D:) (ATA)
I 15:56:21 Destination Media Type: DVD+R DL (Disc ID: FTI-R08-65)
I 15:56:21 Destination Media Supported Write Speeds: 2.4x
I 15:56:21 Destination Media Sectors: 4,267,040
I 15:56:21 Write Mode: DVD
I 15:56:21 Write Type: DAO
I 15:56:21 Write Speed: 2.4x
I 15:56:21 DVD+R DL Reserve Track: No
I 15:56:21 Link Size: Auto
I 15:56:21 Lock Volume: Yes
I 15:56:21 Test Mode: No
I 15:56:21 OPC: Yes
I 15:56:21 BURN-Proof: Enabled
I 15:56:22 Write Speed Successfully Set! – Effective: 3,324 KB/s (2.4x)
I 15:56:22 Book Type Setting: DVD-ROM
I 15:56:22 Advanced Settings – Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes
I 15:56:57 User Specified L0 Data Zone Capacity: 2,133,520
I 15:56:57 Set L0 Data Zone Capacity Succeeded!
I 15:56:57 Filling Buffer… (80 MB)
I 15:56:59 Writing LeadIn…
I 15:57:01 Writing Session 1 of 1… (1 Track, LBA: 0 – 4267014)
I 15:57:01 Writing Track 1 of 1… (MODE1/2048, LBA: 0 – 4267014)
I 15:57:01 Writing Layer 0… (LBA: 0 – 2133519)
I 16:18:52 Writing Layer 1… (LBA: 2133520 – 4267014)
I 16:40:52 Synchronising Cache…
I 16:40:57 Closing Track…
I 16:40:58 Finalising Disc…
I 16:41:49 Exporting Graph Data…
I 16:41:49 Graph Data File: C:UserssAppDataRoamingImgBurnGraph Data FilesATAPI_iHAS524_B_AL2A_2012-10-21_03-56_È.Ù_FTI-R08-65_2.4x.ibg
I 16:41:49 Export Successfully Completed!
I 16:41:49 Operation Successfully Completed! – Duration: 00:45:27
I 16:41:49 Average Write Rate: 3,244 KB/s (2.3x) – Maximum Write Rate: 3,406 KB/s (2.5x)
I 16:41:49 Cycling Tray before Verify…
W 16:41:56 Waiting for device to become ready…
I 16:42:11 Device Ready!
I 16:42:12 Operation Started!
I 16:42:12 Source Device: [2:0:0] ATAPI iHAS524 B AL2A (D:) (ATA)
I 16:42:12 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: FTI-R08-65)
I 16:42:12 Source Media Supported Write Speeds: 2.4x
I 16:42:12 Image File: C:residnt evil 6Resident Evil 6 XBOX360 – DVD1.dvd
I 16:42:12 Image File Sectors: 4,267,015 (MODE1/2048)
I 16:42:12 Image File Size: 8,738,846,720 bytes
I 16:42:12 Image File Volume Identifier: DVD_ROM
I 16:42:12 Image File Volume Set Identifier: eccbc000MS UDFBridge
I 16:42:12 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 16:42:12 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 16:42:12 Image File File System(s): ISO9660; UDF (1.50)
I 16:42:12 Read Speed (Data/Audio): MAX / MAX
I 16:42:13 Verifying Session 1 of 1… (1 Track, LBA: 0 – 4267014)
I 16:42:13 Verifying Track 1 of 1… (MODE1/2048, LBA: 0 – 4267014)
I 16:42:13 Verifying Layer 0… (LBA: 0 – 2133519)
I 16:51:25 Verifying Layer 1… (LBA: 2133520 – 4267014)
W 16:51:38 Failed to Read Sectors 2133520 – 2133551 – Reason: L-EC Uncorrectable Error
W 16:51:47 Failed to Read Sector 2133520 – Reason: L-EC Uncorrectable Error
W 16:52:07 Failed to Read Sector 2133521 – Reason: L-EC Uncorrectable Error
W 16:52:12 Retrying (1)…
W 16:52:19 Retry Failed – Reason: L-EC Uncorrectable Error
W 16:52:23 Failed to Read Sector 2133521 – Reason: L-EC Uncorrectable Error
W 16:52:32 Failed to Read Sector 2133522 – Reason: L-EC Uncorrectable Error
E 16:52:36 Failed to Read Sector 2133522 – Reason: L-EC Uncorrectable Error
E 16:52:36 Failed to Verify Sectors!
I 16:52:37 Exporting Graph Data…
I 16:52:37 Graph Data File: C:UserssAppDataRoamingImgBurnGraph Data FilesATAPI_iHAS524_B_AL2A_2012-10-21_03-56_È.Ù_FTI-R08-65_2.4x.ibg
I 16:52:37 Export Successfully Completed!
E 16:52:37 Operation Failed! – Duration: 00:10:24
I 16:52:37 Average Verify Rate: 6,860 KB/s (5.0x) – Maximum Verify Rate: 11,289 KB/s (8.2x)
I 16:52:41 Close Request Acknowledged
I 16:52:41 Closing Down…
I 16:52:41 Shutting down SPTI…
I 16:52:41 ImgBurn closed!
;

wat u think ?

2012-10-22 at 03:57AM UTC #7928
avatar
twisted247

it’s failing at the layerbreak it’s ur disc 4sure

2012-10-23 at 07:02PM UTC #7946
avatar
esem1982

so its not iso or eeprom setting or buffer size or speed or opc or burn proof or ……

2012-10-23 at 07:04PM UTC #7947
avatar
esem1982

o by the way im wraiting it for LT2

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.