Sammy TS-H943 swapped in an old phat box = still flash?

HomeForumsGeneral DiscussionSammy TS-H943 swapped in an old phat box = still flash?

This topic has 2 voices, contains 5 replies, and was last updated by avatar bigmarky 2841 days ago.

Viewing 6 posts - 1 through 6 (of 6 total)
Author Posts
Author Posts
2011-11-12 at 07:09AM UTC #3735
avatar
bigmarky

Samsung TS-H943

sorry if someone answered this but i saw a few posts but not the answer i was lookin for

i have an older hdmi xbox 360 that i dont know what was originally in it, ill hook it up to JF saturday and figure out waht the firmware was but most ppl say just swap it out for the Lite ON and flash it then put the sammy back in

i know on the slims you can’t do that but this is a phat
can i just put the new LT 2.01 firmware on it and goto the dash board what will happen?

also if i do swap it out for the lite on Lite-on DG-16D2S
how do you make that work putting the samsung back in

just use the lite on to update the dash board then put the sammy back in and put the new fw on it again?

thanks so much

2011-11-12 at 07:24AM UTC #3740
avatar
ILocDogI

Why do you wanna change the sammy? If it still works leave it the way it is. Just put on the original firmware when you update the dash. After that flash the LT 2.01 and have fun playing your games.

2011-11-12 at 09:59AM UTC #3742
avatar
bigmarky

i guess i was just confused

when u say put on the original firmware before updating the dash
could you be more specific

thanks again

2011-11-12 at 10:13AM UTC #3744
avatar
bigmarky

do you mean the original firmware from the first drive in the xbox?

i dont even know which drive was in it so not sure how to pick which one is the original firmware

2011-11-12 at 01:03PM UTC #3748
avatar
ILocDogI

If you have downloaded the firmware package with jungleflasher, then flash the stock firmware on it that belongs to the sammy with your key ( folder: StockFirmware -> Samsung-> Samsung_Pre_13141 -> )
You need to check first what Dashboard you have and what firmware you need to take (Post of Pre) (Can’t say that because i saved my original firmware from my Liteon) (Someone else hopefully can answer here)

After that Update your Dashboard.
And finally Flash the 2.01 Sammy cfw (LT-sammy-v2.01.bin) with your key to the drive.

2011-11-12 at 01:34PM UTC #3749
avatar
bigmarky

i think i got it

right now have the dash board that first came with the kinnect
so i’ll put the matching firmware that goes with the sammy on that dash
then update the dashboard and then reflash

i guess i kept reading that it would figure out that the sammy wasn’t the original drive since i think it was a lite-on in the beginning

can’t say thanks enough man

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.