Samsung LT 2.01

HomeForumsGeneral DiscussionSamsung LT 2.01

This topic has 6 voices, contains 20 replies, and was last updated by avatar anonymou5001 1512 days ago.

Viewing 10 posts - 1 through 10 (of 21 total)
Author Posts
Author Posts
2011-10-24 at 03:18PM UTC #2807
avatar
fernandohg

I have a x360 samsung LT 2.0 , can i install directly to 2.01 or i have to go back to stock then update?

2011-10-24 at 04:07PM UTC #2809
avatar
QuickMythril

you do not need to flash to stock. just install 2.01

2011-10-24 at 04:56PM UTC #2813
avatar
c-h-s

i have Samsung ms28 Drive and flashed with new fix LT 2.01 but my Drive doesn´t play Games with XGD3. All other and AP25 Games are working fine but not XGD3 Games. After starting XGD3 Game error is: Disk can not read……………. Please help me!!!!

2011-10-25 at 02:35PM UTC #2869
avatar
Cicciocampomix

i’ve the same problem…

2011-10-25 at 04:07PM UTC #2882
avatar
QuickMythril

samsung is known for having trouble with certain brands of discs. i know for sure that memorex almost never read in samsung drives. what type of disc are you using? did you verify the burn afterwards? does the title show up or does it just say play game? also did you burn these using the truncated iso method or do you have the burner max fw to fit the entire iso?

2011-10-25 at 05:59PM UTC #2905
avatar
c-h-s

Both method`s not working…………….truncated or Burner Max both not words.Error: Disc can not read………..only by XGD3 Games.all other Games and AP25 are running perfectly.
I have Dashboard 13599 with Samsung ms28 and LT 2.0 and have flashupdated from 2.0 to LT 2.01.
I dont know, why Jungelflasher tells me the LT 2.01 is LT 2.0 and my ms28 is in OSIG: not spoofed
Is my original Drive

2011-10-25 at 06:00PM UTC #2906
avatar
c-h-s

and all my Disk are PLATINUM and works fine with Samsung ms28 but not the XGD3 Discs.

2011-10-25 at 06:14PM UTC #2911
avatar
QuickMythril

i think it is normal for jungleflasher to report 2.01 as 2.0. when 2.0 first came out i used the older jungleflasher and it reported 2.0 as 1.1, so it’s just a matter of jungleflasher “knowing” the true name of the firmware. but either way it still flashes properly.

your problem could just be that the samsung drive has more trouble reading those discs at the very edge compared with the xgd2 discs that don’t have to read out as far…

what speed did you burn the discs at? and did you try to verify them against the iso on the computer after you burned them?

2011-10-25 at 07:57PM UTC #2941
avatar
c-h-s

I burn the Diskcs all with 4x and PLATINUM with ImgBurn and Truncend mode (burn to end of disk) and the disks running on liteon or benq drives but not with my ms28 with LT 2.01.

All other AP25 Games on same PLATINUM Discs and running but not when XGD3.
When i burn Disk Verbatim MKM003 with wit 2,4x OPC=off in ImgBurn and With iHAS624B with ixtreme MAX 1.0 Firmware i have same Probleme. No XGD3 Disks working with my ms28. All other XGD2 and AP25 Games working fine. I dont know, why XGD3 not works!!!! PLEASE HELP

Why the Discs working by Liteon and BenQ drives with LT+ 2.0 but not with ms28 with LT 2.01 ???

How can help me?

2011-10-25 at 08:01PM UTC #2943
avatar
c-h-s

when i reflash to Stock Firmware the ms28 and after i flash again new the LT 2.01 ? it is better?

The PLATINUM Disks working fine every day but not with XGD3. Verbatim the same………………no XGD3 and ms28 Drive……………..same error: Disc can not read…………………….

But this disc woriking fine with Liteon or BenQ Drives………………….

Viewing 10 posts - 1 through 10 (of 21 total)

You must be logged in to reply to this topic.