|2012-10-31 at 03:24PM UTC #8009|
hi could any one help me out here please i’m new to the hole flashing game and i am wanting to know if the samsung TS-652M is a compatible drive with your ixtreme burner max software as it was given to me by a friend as he did not use it no more.
would be great if i could get as much help on this as possible.
|2012-11-01 at 11:04AM UTC #8025|
The “iXtreme Burner MAX” customized PC DVD burner fw allows for burning 100% of an XGD3 ISO to regular DVD+R DL discs. Preferred media for error-free burns are Verbatim MKM001 (burning at 2.4x), and Verbatim MKM003 (burning at 2.4x or 4x). Note: “A” versions have MTK chipset, but are old and untested. “Y” versions have the NEC chipset, which is not supported. All regular features of the burner function as normal, including LightScribe, LabelTag, Smart-Erase, Smart-Burn, Smart-X, and SuperAllWrite. Even with the custom iXtreme Burner MAX fw flashed to the drive, it is still fully functional as a regular burner, not only for XGD3, but also XGD2, and all other ISOs and data, up to 8.7GB worth.
iHAS124B v1.0 RELEASED
iHAS224B v1.0 RELEASED
iHAS324B v1.0 RELEASED
iHAS424B v1.0 RELEASED
iHAS524B v1.0 RELEASED
iHAS624B v1.0 RELEASED
Click here for a list of additional cross-flashable drive models that support Burner MAX
In addition to the normal Lite-On iHAS “B” burners, there are several other drive models of different brands that can be cross-flashed to an iHAS by using the original Lite-On iHAS firmware and EEPROM utilities. These cross-flashable drives are re-badged OEM drives, which means they are manufactured by Lite-On and contain the same internal hardware and components as the Lite-On iHAS, but are sold under a different brand name (ASUS, Dell, HP, Plextor, TEAC), some with a different faceplate/bezel on the front of the drive, and/or with different retail packaging.
Please note that the cross-flashable drive models marked with a * in the list below have multiple revisions, of which only the “B” revision is supported. Revision “Y” (NEC chipset), “A” (older MTK chipset), “C” (MTK chipset/1MB flash), and “D” (MTK chipset/1MB flash) are not compatible. c4eva’s custom Burner MAX firmware is based on the Lite-On iHAS “B” revision which has an MTK chipset with 2MB flash.
The revision letter is usually indicated somewhere on the retail box and also on the label sticker on the drive itself. For some drives, the revision letter is part of the drive model, or appears near or after the end of the drive model on the label sticker. Depending on when a particular model was manufactured and the retail destination country/region, the configuration and placement of the stickers may be slightly different; different arrangement, dual barcodes, different certification logos, and so on. If you are purchasing a cross-flashable drive online or from a retail store, you should have customer service or the salesperson check the label on the box or the sticker on the drive to ensure that it is in fact a “B” revision.
Please refer to the gallery of images on the dedicated iHAS & cross-flashable list page for examples of some of the different revisions’ drive label stickers and box labels.
The following drive models are confirmed capable of being cross-flashed with c4eva’s iXtreme Burner MAX firmware:
so no it’s not but this is the list. good luck
|2012-11-03 at 11:47AM UTC #8048|
ok thank you for the advice
You must be logged in to reply to this topic.