Swap Liteon for Liteon on Phat console

HomeForumsGeneral DiscussionSwap Liteon for Liteon on Phat console

This topic has 3 voices, contains 2 replies, and was last updated by avatar twisted247 2256 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
2011-10-15 at 09:09AM UTC #2210
avatar
nuclearmonkeyuk

Hey guys,

I’ve had a drive come in that just isnt reading disks at all.. I want take the bad liteon drive out and replace it with a good liteon drive i have here.

How do i go about swapping them over in jungle flasher? Do i just extract both drives FW then flash the FW taken from the old drive onto the new? I’ve never manually loaded source and terget fw before could you explain how to do this?

Cheers

2011-10-15 at 09:33AM UTC #2211
avatar
ILocDogI

yep just take the old fw for the new drive

2011-10-15 at 12:36PM UTC #2220
avatar
twisted247

either change the laser from bad to good 1 or change the pcb either one of these answers will do and no flashing required

or just write the fw to the new drive all u need is the key from the old one as after the 13146 dash update all liton phats became the same model 025xxc

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.