xgd3 discs wont play right

HomeForumsGeneral Discussionxgd3 discs wont play right

This topic has 3 voices, contains 13 replies, and was last updated by avatar koko32 1125 days ago.

Viewing 10 posts - 1 through 10 (of 14 total)
Author Posts
Author Posts
2011-10-27 at 06:22PM UTC #3114
avatar
koko32

ive been trying to play xgd3 games both with and without burner max firmware on my Ihas 324 and all of them either get the unreadable disk error or play and freeze alot. this is probably a stupid question but could it be that when i flashed my 360 drive with lt+2.0 it was a bad flash even though i can still partialy play xgd3 games? and im using this http://www.overstock.com/Electronics/USB-2.0-to-IDE-SATA-Converter-Cable/4370814/product.html?cid=202290&kid=9553000357392&kw={keyw ord}&adtype=pla with my laptop and its hooked up to my burner im not sure if using this has to do with the problem or has anyone else used it?
1.Im using verbatim 8x
2.im using img burn and have all correct settings
3.it verifys on img burn
4.
and i can only install disks on my hdd that partialy work the ones that have the disc read error cant be installed

  • This reply was modified 1126 days ago by avatar koko32.
2011-10-27 at 06:55PM UTC #3121
avatar
QuickMythril

firstly 8x is not recommended according to c4e, also imgburn is not a thorough way to verify discs, check my new thread about the KProbe2 tool. what drive are you using, and have you ever calibrated your laser? also you could try to reflash LT 2.0 to your drive, but if it was a bad flash i don’t think it would “partially work”…?

2011-10-27 at 07:04PM UTC #3126
avatar
koko32

i have a IHAS 324 98B and yes i calibrated it earlier and nothing changed.

2011-10-27 at 07:09PM UTC #3129
avatar
QuickMythril

i meant what xbox dvd drive do you have, and did you calibrate the laser in your xbox.

2011-10-27 at 07:22PM UTC #3134
avatar
koko32

oh i have a lite on and i did calibrate it

2011-10-27 at 07:52PM UTC #3137
avatar
QuickMythril

try burning at 4x or 2.4x and verifying with KProbe2.

2011-10-27 at 08:30PM UTC #3147
avatar
koko32

i burnt batle field 3 and it verified error free and it wont play still

2011-10-27 at 08:54PM UTC #3148
avatar
QuickMythril

was this burnt at 8x? did you verify it with imgburn or kprobe?

2011-10-28 at 12:51AM UTC #3164
avatar
TheBestSeeder

I cannot get any to play anymore, the first burn i ever did was flawless and played no problem, GOW3 but my next tries, Driver, Batman, etc burned perfect no errors but it keeps giving me a dirty disc error every time I got to play it. Why is this? Ive got all the settings rite, MKM003 verbs, Singapour, OPC on and burn proff, verify against image file, what is the problem cause its getting very expensive keep getting dirty discs error. At least I have plenty of coffee coasters. Angry

2011-10-28 at 01:10AM UTC #3165
avatar
QuickMythril

what? who are you? at first i thought you were the original poster, but it appears as though you’ve hijacked this thread… now we have to ask all the same questions again… unless koko32 and TheBestSeeder are the same person??

what speed are you burning at? what type of dvd drive is in your xbox, have you tried calibrating the laser?? not to be rude, but if you aren’t able to figure out how to properly post a question, or spell “right” or “Singapore” then how are you so sure you did all the steps properly??? what is burn proff?

Viewing 10 posts - 1 through 10 (of 14 total)

You must be logged in to reply to this topic.