XGD3 Games Freezing

HomeForumsGeneral DiscussionXGD3 Games Freezing

This topic has 2 voices, contains 3 replies, and was last updated by avatar twisted247 1501 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
Author Posts
Author Posts
2012-10-25 at 06:27PM UTC #7958
avatar
DEVINEcr

Hey everyone! I’m having an issue with my flashed BenQ. I’ve been burning my own games for a while now but every XGD3 game i burn freezes after 5-50 minutes of playing. Retail games still work great as do XGD2 games. I have LT 3.0, run through ABGX 1.0.6 use verbatims 001 and i tried burning at both 2.4x and 4x with Iimgburn and haven’t noticed a difference. I was wondering if anyone else had this issue or could point in the right direction for a solution. Thanks in advance!

2012-10-26 at 05:50PM UTC #7962
avatar
DEVINEcr

Also i used an ihas 324 to burn them, Ive been looking for a solution to my problem for a long time someone please help

2012-10-26 at 07:59PM UTC #7963
avatar
DEVINEcr

Here are my kprobe2 results they’re pretty bad lol

Date : 10/26/2012 1:07:08 PM
Model : 1-0-0-0 E:ATAPI iHAS324 B AL1B
Disc : DVD+R DL , MKM001 [Mitsubishi Chemical Corporation]
Speed : 2x
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 – 4267021
Sampling count : 250051
Errors : 0
PI Max : 281
PI Average : 44.68
PI Total : 1398619
PIF Max : 13
PIF Average : 0.47
PIF Total : 14846

2012-10-27 at 03:25AM UTC #7970
avatar
twisted247

install the game to the harddrive then launch it from the harddrive and it will play from there it will need to have the disc in the drive for security proposes but will only read/spin disc about two minutes then stops and plays from the harddrive. will save your laser and those read error’s from disc will stop. the area that burnermax fw allows the drive to write to on the dvd dl disc is unstable and that’s why factory drive wont write to it but we needed to beable to so to fit th hole game on the disc 100% copy so to speak. so read error become more common when playing from disc . play from hdd .

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.