XGD3 testing with KProbe2

HomeForumsGeneral DiscussionXGD3 testing with KProbe2


This topic has 9 voices, contains 22 replies, and was last updated by avatar flava5683 2762 days ago.

Viewing 3 posts - 21 through 23 (of 23 total)
Author Posts
Author Posts
2011-12-29 at 10:33PM UTC #5351

I am a bit confused now. I’ve followed this guide (http://www.ixtreme.net/downloads-tutorials/21996-howto-patch-topology-data-burn-then-verifying-kprobe.html#post155748) to add the topology data, burn an image with burner max fw and checked the disk with kprobe.

These are my results:

Date : 29.12.2011 23:15:49
Model : 2-0-1-0 I:ATAPI iHAS124 B AL0S
Disc : DVD+R DL , MKM003 [Mitsubishi Chemical Corporation]
Speed : 4x
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 – 4267017
Sampling count : 249776
Errors : 0
PI Max : 41
PI Average : 6,66
PI Total : 208452
PIF Max : 4
PIF Average : 0,10
PIF Total : 3270

According to the said Guide, my copy of GoW3 wouldn’t match the requiered data b/c the PI Average is above 5 but, on the Team-Xectuter Guide/List for KProbe I can’t find anything that says what the average values should be, just the max values.

Just for clarification:

I’ve used an iHas124B Drive with Burner Max Fw, imageburn to burn the Image on a Verbatim MKM003 DL Disc and set OPC in imageburn on and write Speed at x4.

What do you guys say, is this image safe to use on my LT3.0 flashed Xbox360, or do i have to set something like Phrill and test around?

thanks in advance


2011-12-29 at 10:43PM UTC #5352

also i want to add that i havent tested the game with my box b/c i am a little bit afraid that i might get flaged even if i only play offline^^

2011-12-30 at 11:40AM UTC #5372

okay, doesn’t matter anymore i think. got an really good result with this guide http://www.ixtreme.net/open-forum/17835-how-i-burn-check-xgd3-back-ups-using-imgburn-2-5-6-0-kprobe-2-a.html

Viewing 3 posts - 21 through 23 (of 23 total)

You must be logged in to reply to this topic.